Temperature, humidity and flow sensors for air conditioners
In recent years, our demands for comfort in the environment in which we live, work or spend our leisure have increased considerably.
For these reasons, we are increasingly using various types of air conditioners, their judicious choice has a great influence on energy savings.
The purpose of air conditioning is to provide, depending on the internal and external inputs, an optimum temperature in the air-conditioned room. GUILCOR company is engaged in the development and supply of temperature sensors which are an integral part of air conditioning systems and units.
Among the most important customers of GUILCOR are manufacturers of air conditioning and cooling units, as well as assembly and maintenance companies.
Ambient temperature measurement
The following probes can have resistance, current, digital, and frequency output. All probes offer the possibility of encapsulating two sensors as well as non-standard sensitive elements (DALLAS, TSic, KTY, SMT and others). The S 110 range of probes is also designed for explosive environments.
Pipe temperature measurement
The TR 080 temperature sensor is able to provide a rapid response from the connected system. The sensor is installed as standard on one of the tubes of the water exchanger. The S 140 or S 150 series temperature sensors can be attached directly to the piping. The advantages of these sensors lie in their ease of disassembly in the event of failure without the need to discharge the fluid. The S 140 sensor range is also designed for explosive environments.
Temperature measurement in supply or return duct
For the measurement of the air temperature in the air conditioning ducts, it is possible to use sensors with stainless steel rods and heads with terminal blocks. In case of low temperature operation, the sensors can be used for frost protection. The S 120 sensor range is also designed for explosive environments. In addition, we offer the range of PTS 4x and PTS 6x temperature sensors in resistance and with the possibility of installing programmable converters.
Air conditioner humidity sensors
The PTSV series sensors are designed for measuring humidity and temperature in air conditioning applications in industrial or residential premises. The sensors are designed for surface or pipe installation, with current outputs. In combination with sensors for dew point detection, these sensors are used when it is necessary to prevent condensation on surfaces, condensation on critical locations of equipment or in buildings (air conditioning ducts, near fans).
Flow sensors are designed to dynamically measure the flow of gaseous fluid. Flow switches are designed to activate the load when the air flow setpoint is reached. By combining the flow sensor or switch and the center bracket, it is possible to use the meter in air conditioning ducts or ducts with voltage outputs.