Axial temperature and humidity probe for duct - 4-20mA output
Product features Axial temperature and humidity probe for duct - 4-20mA output
Transmitter temperature and humidity.
Use Case exterior and interior.
Editing on sheath.
Relative humidity, rod temperature sensors 150mm.
The measured values are also converted to another interpretation of humidity: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Relative humidity
- Calculated values (dew point, etc.)
Temperature range : -30 to 125 ° C
Relative humidity range: 0 to 100%
Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C
Accuracy of temperature output: ± 0,4 ° C from -30 to + 100 ° C
± 0,4% from reading at + 100 ° C
Available temperature units: degrees Celsius, Fahrenheit
Dew point output accuracy and range - for details see graphs: ± 1.5 ° C at ambient temperature T <25 ° C and RH> 30%
range -60 to +80 ° C
Dew point output accuracy and range - for details see graphs: ± 1,5 g / m3 at ambient temperature T <25 ° C
range from 0 to 400 g / m3
Accuracy and Specific Humidity Output Range Accuracy and Dew Point Temperature Output Range - for details see graphs: ± 2 g / kg at room temperature T <35 ° C
range 0 to 550 g / kg
Accuracy and output range of mixing ratio: ± 2g / kg at ambient temperature T <35 ° C
range from 0 to 995 g / kg
Precision and range of specific enthalpies: ± 3 kJ / kg at ambient temperature T <25 ° C
range: 0 to 995 kJ / kg
Housing operating temperature range with electronics: -30 to +80 ° C
LCD display operating temperature range: readable at an operating temperature of + 70 ° C, it is recommended to turn off the LCD screen above 70 ° C
Humidity sensor temperature compensation range: the entire temperature range
Current outputs - two-wire connection: 4-20mA, galvanically isolated with dual output models
Configuration of outputs and output range: user adjustable from PC
Filtering capacity of the sensor cover: 0.025mm - filter with stainless steel mesh
Housing protection with electronics: Electronics IP65, sensors IP40
Supply : 9-30Vdc
Display dimensions: 88,5 x 250 x 39,5 mm (W x H x D), rod length 150 mm
Weight: about 225g
Warranty: 3 years