Product features CO2 concentration sensor with Ethernet interface - Remote sensor
CO2 level transmitter with two output relays.
The measurement of CO2 is based on a 2-source and 2-beam process.
CO2 measurement with a long term stability is guaranteed thanks to the non-dispersive infrared CO2 measuring cell (NDIR) proven.
The unique patented self-calibration procedure compensates for aging of the infrared source and ensures high reliability, long-term stability and eliminates the need for periodic recalibration in the field.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Cloud for 3 months
CO2 concentration measurement range: 0 to 10000ppm
Accuracy of CO2 concentration measurement: ± (100ppm + 5% from reading) at 25 ° C and 1013hPa
Measuring interval: 15s
Temperature operating range: -30 to +60 ° C
IP protection: IP30
Number of relay outputs: 2
Maximum switching voltage, current and power of the relay output: 50V, 2A, 60VA
Audible alarm: integrated beep - switchable
IP connection: RJ-45, 10Base-T or 100Base-TX connector
Communication protocols: WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocols: E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration: T-Sensor, Telnet, keyboard
Supply : 9 to 30 Vdc, consumption of about 1W
Power cable : coaxial, diameter 5,5 x 2,1 mm
Dimensions: 136 x 150 x 45mm (W x H x D)
Weight: about 320g
Warranty: 3 years
power supply is not included in delivery