ATEX probe with connection head (Pt100, Ni1000, NTC)

Delivery in 3 to 5 weeks

Product features ATEX probe with connection head (Pt100, Ni1000, NTC)

JS 130 stainless steel glove fingers
metal support K 120 - for ventilation ducts
metal support K 100C - for wall mounting
mounting with collar or rings - if the length of the temperature sensor rod is different

*) maximum input power

OTHER PARAMETERS
Measuring range	v ZONE 2: -30°C ≤ Ta ≤ 80°C
Connection of temperature sensors	2 wire, 3 wire, 4 wire
Recommended power	from an SELV or PELV source, maximum absorbed power of 2 mW
Response time	in accordance with ČSN EN 60751 (in running water> 0,2 m / s), - for a rod diameter of 4 mm: τ0,5 ≤ 4 s, τ0,9 ≤ 10 s - for a rod diameter of 6 mm: τ0,5 ≤ 9 s, t0,9 ≤ 20 s - for rod diameter 8 mm: τ0,5 ≤ 14 s, τ0,9 ≤ 35 s - for rod diameter 10 mm: τ0,5 ≤ 25 s, τ0,9 ≤ 60 s
Insulation resistance	> 200 MOhm at 500 V DC, 25 ± 3 ° C, humidity <80%
Electric force	1000 V DC for 1 s, 25 ± 5 ° C, max 80%
Degree of protection	IP 66 according to EN 60529
Terminal type	Ceramic, recommended conductor cross section from 0,5 to 1,0 mm 2
Head material	en aluminum
Head dimensions	83 x 83 mm
Resistance to head temperature	-30 to 90 ° C
Material of the stem	stainless steel DIN 1.4301, 1.4404 or 1.4571
Diameter of the dial D	4 mm, 6 mm, 8 mm, 10 mm
Standard rod length L	diameter 4 mm: 70, 120, 180, 240 mm other diameters: 50, 70, 120, 180, 240, 300, 360 and 420 mm
Resistance to supply wires	0,254 Ω / m (two-wire connection)
Maximum operating pressure	with a rod diameter of 4 mm at 2,5 MPa with a 6 to 10 mm diameter rod at 6,3 MPa
The weight	min 0,4 kg