
Resistance thermometer with connection head, insert and soldered connection - ATEX intrinsically safe
- ATEX EXI
- -200 to +550 ° C
- Sensor of your choice
- Terminal block
The temperature range of the sensor depends on the insulation of the connection cable.
Temperature difference | Possible diameters of the protection tube | Cable insulation |
-10..+105°C | Ø5, Ø6, Ø8 mm | PVC |
-50..+180°C | Ø5, Ø6, Ø8 mm | silicone |
-50..+260°C | Ø3, Ø4, Ø5, Ø6, Ø8mm | teflon® PFA |
-50..+400°C | Ø5, Ø6, Ø8 mm | fiberglass |
The resistance thermometers of this series are designed for instant installation directly in the process. These thermometers are suitable for liquid and gaseous media under moderate mechanical load and under normal chemical conditions.
The sensor consists of a thermometric resistance, a protective tube and a cable.
The length of the protective tube, the type of construction, the number of sensors, the accuracy, the cable insulation and the connection method can be individually selected for the respective application.
This datasheet is only a small portion of our cable resistance thermometer supply program. On customer request, other versions can also be delivered.
![]() |
PVC / Sheath: PVC | -10 .. + 105 ° C |
![]() |
Silicone / Sheath: silicone | -50 .. + 180 ° C |
![]() |
Teflon FEP / Sheath: silicone | -50 .. + 180 ° C |
![]() |
Teflon FEP / Sheath: silicone / Braid: copper | -50 .. + 180 ° C |
![]() |
Teflon PFA / Sheath: teflon PFA | -50 .. + 260 ° C |
![]() |
Teflon PFA / Braid: stainless steel | -50 .. + 260 ° C |
![]() |
Teflon PFA / Sheath: teflon PFA / Braid: copper | -50 .. + 260 ° C |
![]() |
Fiberglass / Sheath: fiberglass / Braid: stainless steel | -50 .. + 500 ° C |