Resistance thermometer with connection head, fast response time and welded connection - ATEX intrinsically safe *Step required

GXI-TTGNR / GXI-APTTGNR
In production :  1 to 3 weeks
  • Design temperature range: -40 .. + 800 ° C
  • Technological process installations in all industries
  • Installation in hazardous areas:
    Gases, vapors, mists (G): Zone 0, 1, 2
    Dust (D): Zone 20, 21, 22
    Mines: M1 
Your configuration:

International shipping

FREE shipping in Europe from 100 € of purchase

Secure Payments

All payments are secure and approved.

Best price guarantee

Contact us to define your payment term.

+33-233-611-670

English - French - German - Spanish

Features

  • Single and double TC
  • Interchangeable mineral insulated measuring insert
  • Process connection welded to the protective tube
  • Protective tube diameter: Ø6, Ø8, Ø9, Ø10 mm
  • Protective tube material: stainless steel 1.4541 (AISI321) or other
  • ATEX cable gland I M1, II GD, IP65 (cable diameter Ø5..10mm)
  • Output signal: TC or 4..20 mA (option)


Description

The thermocouple thermometers in this series are designed to be screwed directly into the process, primarily into vessels and pipelines. These thermometers are suitable for liquid and gaseous media under moderate mechanical load and under normal chemical conditions.

Construction

The sensor consists of an interchangeable measuring insert, an external protective tube (thermowell) with neck and an aluminum connection head where the mounting of a temperature transmitter with an output signal 4 -20 mA / HART® or Profibus®PA is possible.

The measuring insert is the replaceable part of the complete sensor which reduces the time and cost of maintaining the measuring device installed in the object. The spring-loaded attachment of the measuring insert provides perfect pressure at the bottom of the protection tube, reduces reaction time to temperature changes and increases measurement accuracy and reduces natural vibrations, thus avoiding mechanical and electrical faults .

Insertion length, process connection, thermowell design, connection head as well as type and number of sensors and accuracy can be individually selected for the respective application.

Temperature transmitter (option)

The transmitter is mounted inside the sensor connection head: directly on the measuring insert or in the cap 
top of the head.


The second method is advantageous because it allows to quickly change the standard measurement support without having to disassemble the transmitter; this means reduced sensor maintenance time and costs and the protection of wires from possible damage. Mounting of two transmitters inside the connection head available on request.

Type G1 Aluminum, Exe M20x1,5 cable gland, IP68
Type G2 Aluminum, Exe M20x1,5 cable gland, IP68
Type G5 Aluminum, 2 x Exe M20x1,5 cable gland, IP68
Type G6 Aluminum, 2 x Exe M20x1,5 cable gland, IP68

Information

Type of entries
Dual thermocouple inputs
Thermocouple
Maximum operating temperature
800°C
Diameter
6 mm
8 mm
9 mm
10 mm
Thermocouple type
J
K
N
Type of outputs
4.20mA
Certification
ATEX EXI
Related products (8 other products in the same category)

Create account