Resistance thermometer with connection head and internal insert - ATEX intrinsically safe
- ATEX EXI
- -200 to +550 ° C
- Sensor of your choice
- Terminal block
Signed sensors ex.jpg II 2G IIC Tx Gb et ex.jpg II 2D Ex tb IIIC TX Db have been designed for temperature measurement in zones 1 (21) and 2 (22).
Resistance thermometers in this series are designed to be flanged directly into the process, primarily in vessels and pipelines. These thermometers are suitable for liquid and gaseous media under moderate mechanical load and under normal chemical conditions.
The sensor consists of an interchangeable measuring insert, an external protective tube (thermowell) with neck and an aluminum connection head where the mounting of a temperature transmitter with an output signal 4 -20 mA / HART® or Profibus®PA is possible.
The measuring insert is the replaceable part of the complete sensor which reduces the time and cost of maintaining the measuring device installed in the object. The spring-loaded attachment of the measuring insert provides perfect pressure at the bottom of the protection tube, reduces reaction time to temperature changes and increases measurement accuracy and reduces natural vibrations, thus avoiding mechanical and electrical faults .
Insertion length, flange size, thermowell design, connection head as well as type and number of sensors, accuracy and connection method can be individually selected for the respective application.
The transmitter is mounted inside the sensor connection head, directly on the measuring insert.
|Type GW1||aluminum, M20x1,5 cable gland|
|Type GW2||aluminum, 2 x cable gland M20x1,5|
|Type GW3||aluminum, M20x1,5 cable gland, with window for local LED display (LPI-02)|
|Type GW4||aluminum, 2 x cable gland M20x1,5, with window for local LED display (LPI-02)|
|Type S1||stainless steel, M20x1,5 cable gland|
|Type S2||stainless steel, 2 x cable gland M20x1,5|