Call us : +33 2 33 61 16 70
EN
croatian Czech Dutch French German Italian polish Portuguese Romanian Spanish
TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104
TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104
TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104
TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104 TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104 TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104

TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104

Reference GKSD04R

Sensor type KSD 104

CAN / CANOpen-CIA DS 301 output signal

Measuring range -30 to 70 ° C

Measuring accuracy ± 0,5 ° C

Supply voltage (U) 15 to 30 V DC

Nominal supply voltage (Un) 24 V DC

Maximum power consumption / current: 500 mW

typical: 300 mW

Protection index IP 30 according to EN 60529, as amended

Head dimensions 71,9 x 59 x 27 mm

LEXAN head material (conforms to EN 45545-2)

Recommended wire cross section 0,14 to 1 mm2

Working conditions ambient temperature: -40 to 80 ° C

relative air humidity: max 85%

atmospheric pressure: 87 to 107 kPa

Min weight 50 grams

Tests

Shock and vibration tests

category 1, class B according to EN 61373

Electromagnetic compatibility according to EN 50121-3-2

Insulation test 1,5 kVDC for 1 minute according to EN 50155

Fire resistance

according to EN 45545 (possible according to NFPA 130)

Product features TEMPERATURE SENSOR WITH CAN OUTPUT PROTOCOL FOR INDOORS KSD104

This CAN / CANopen - KSD 104 digital output temperature sensor for interiors is designed to measure the temperature of gaseous substances in spaces protected against water. In the application segment of railway vehicles, it is used to measure the temperature in the passenger compartments of train units and wagons and is part of the temperature control system.

The temperature sensor with CAN / CANopen digital output - KSD 104 for interiors consists of a plastic ribbed head, where a printed circuit board with the individual sensors or a converter is placed to establish a particular digital output according to the type of sensor. Appropriate design and high-quality materials ensure that the sensors are not disturbing, even in interiors with high aesthetic requirements. You can choose the color of the box white or gray.

The temperature range of use of the sensors is defined in the table of technical parameters for the different versions of the sensors. The sensors meet the protection index IP 30 according to EN 60529, as amended. Installation is recommended on an interior wall at a height of 1,5 m, in areas of movement of people, in places not exposed to direct sunlight and not influenced by the heat of walls, heating radiators or lighting.

The sensor is designed to operate in a chemically non-aggressive environment, the use must be chosen according to the temperature and the chemical resistance of the sensor head.

TESTS, DECLARATION, CALIBRATIONS

Type tests are carried out by a notified body according to standard EN 50155, as amended, Railway applications - Electronic equipment used on rolling stock, Art. 12.2.9, 12.2.11

- Electromagnetic compatibility according to standard EN 50121-3-2, as amended

- Insulation test according to EN 50155, as amended

- Shock and vibration tests according to EN 61373, as amended

The product meets the parameters in accordance with EN 45545-2, as amended, Fire protection of railway vehicles - Part 2: Requirements for the fire behavior of materials and components. May be supplied with materials that meet NFPA 130 fire safety standard, as amended.

These products can interest you