Temperature and humidity controller with relay 230Vac / 8A

TECHNICAL DATA

Hygrostat and thermostat with 2 relay outputs.

Probe temperature and humidity relative on cable.

The measured values ​​can also be converted into: dew point, absolute humidity, specific humidity, ratio of mixtures, specific enthalpy.

INCLUDED IN DELIVERY

• AR005071
• Manual
• Traceable calibration certificate
• Free Tsensor configuration software
  
  

MEASURED VALUES

- Temperature
- Relative humidity

Maximum power, voltage, current, of the relay outputs: 250Vac, 8A

Audible alarm: Integrated - dice connectable

Relative humidity range: 0 to 100%

Relative humidity measurement uncertainty: ± 2.5% RH from 5 to 95% at 23 ° C

Temperature measurement uncertainty: ± 0.4 ° C from -30 to + 100 ° C
± 0.4% of reading above + 100 ° C

available units: degrees Celsius, Fahrenheit

Uncertainty and dew point measurement range: ± 1.5 ° C at ambient temperature T <25 ° C and RH> 30%
Range -60 to +80 ° C

Uncertainty and absolute humidity range: ± 1.5g / m3 at ambient temperature T <25 ° C
Range 0 to 400 g / m3 

Uncertainty and specific enthalpy range: ± 2g / kg at ambient temperature T <35 ° C
Range 0 to 550 g / kg

Uncertainty and range of the mixture ratio: ± 2g / kg at ambient temperature T <35 ° C
Range 0 to 995 g / kg

Uncertainty and specific enthalpy range: ± 3kJ / kg at ambient temperature T <25 ° C
Range 0 to 995 kJ / kg

Temperature operating range: -30 to + 80 ° C

LCD display operating temperature: Reading possible at + 70 ° C, it is recommended to switch it off above 70 ° C

Relative humidity sensor temperature compensation of: -30 to + 125 ° C

Protection filter: 0.025mm - Filter with stainless steel mesh

Protection sign : IP65 electronic, IP40 sensor

Supply : 110 to 240V / 50Hz to 60Hz

Current consumption: 230 VAC - max. 70mA, 115VAC - max. 120mA

Cable length: 1m, 2m or 4m optional

Dimensions: 36 x 161 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm

Weight: About 450g, 1m of cable

Warranty: 3 years