Transmitter temperature and humidity with two relay outputs.
Use Case exterior and interior.
Relative humidity, temperature probe on a cable.
The measured values are also converted to another interpretation of humidity: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Three inputs with two states.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Relative humidity
- Calculated values (dew point, etc.)
- Two state signal
Maximum switching voltage, current, power of the relay output: 50V, 2A, 60VA
Audible alarm: from integrated beeper - switchable
Relative humidity range: 0 to 100%
Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C
Accuracy of temperature output: ± 0,4 ° C from -30 to + 100 ° C
± 0,4% from reading at + 100 ° C
Available temperature units: degrees Celsius, Fahrenheit
Dew point output accuracy and range - for details see graphs: ± 1,5 ° C at ambient temperature T <25 ° C and relative humidity> 30%
range -60 to +80 ° C
Accuracy and absolute humidity output range: ± 1,5 g / m3 at ambient temperature T <25 ° C
range from 0 to 400 g / m3
Accuracy and specific humidity output range: ± 2 g / kg at room temperature T <35 ° C
range 0 to 550 g / kg
Accuracy and output range of mixing ratio: ± 2g / kg at ambient temperature T <35 ° C
range from 0 to 995 g / kg
Precision and range of specific enthalpies: ± 3 kJ / kg at ambient temperature T <25 ° C
range: 0 to 995 kJ / kg
Signal for binary inputs: voltage-free contact, open collector or two-state voltage signal.
The inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms
Open contact voltage: 3.3 V
Low voltage level: 0 to +0.5 V
High voltage level: +3.0 to + 30V
Temperature operating range: -30 to +80 ° C
LCD display operating temperature range: readable at an operating temperature of + 70 ° C, it is recommended to turn off the LCD screen above 70 ° C
Temperature compensation of humidity sensor: the entire temperature range
Filtering capacity of the sensor cover: 0.025mm - filter with stainless steel mesh
Communication protocol : ModBus RTU and Advantech ADAM compatible protocol
Communication speed: 110 to 115200 Bd
IP protection: Electronics IP65, sensors IP40
Food : 9-30Vdc, power consumption about 1W
Probe cable length: 1m, 2m or 4m optional
Dimensions: 136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm
Weight: about 420g - 1m probe
Warranty: 3 years