Sensor with integrated sensors to measure temperature and relative humidity with two output relays.
Converting to humidx.
The H3530 sensor is designed for online monitoring of temperature, relative humidity and air humidity without aggressive substances.
The advantage is three binary inputs for the detection of two-state signals.
The other devices are controlled by two relay outputs.
The high precision capacitive polymer sensor provides excellent long term calibration stability and ultimate precision.
The measured values are also converted to another interpretation of humidity: humidx, dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- COMET Cloud for 3 months
- Relative humidity
- Calculated values (dew point, etc.)
Relative humidity measurement range: 0 to 100%
Relative humidity measurement uncertainty: ± 2,5% RH from 5 to 95% at 23 ° C
Temperature measurement uncertainty: ± 0.4 ° C
Resolution: 0.1 ° C, 0.1% RH
Measuring interval: 2s
Available units: degrees Celsius, Fahrenheit
Calculated values: Dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Uncertainty and dew point measurement range: ± 1,5 ° C at ambient temperature T <25 ° C and RH> 30%
range -60 to + 80 ° C
Temperature compensation of the humidity sensor: The whole range of temperatures
Temperature operating range: -30 to + 80 ° C
IP protection index: IP40
Number of relay outputs: 2
Maximum switching voltage, current and relay output power: 50V, 2A, 60VA
Number of binary inputs: 3
Signal for binary inputs: Dry contact, open collector, or two-state voltage signal.
The inputs are not galvanically isolated.
Audible alarm: Integrated - dice connectable
LAN connection: RJ-45, 10Base-T or 100Base-TX connector
Communication protocols: WWW, Modbus TCP, SNMPv1, SOAP
Alarm protocols: E-mail, SNMP Trap, Syslog
Configuration: T-Sensor, Telnet, keyboard
Supply : 9 to 30 Vdc, maximum consumption 1W
Cable length: Coaxial, diameter 5,5 x 2,1 mm
dimensions: 136 x 213 x 45 mm (W x H x D), rod length 75 mm
Weight: about 360g
Warranty: 3 years