Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

TPL503 + BB211 controller

Reference AR001018

Delivery in 3 to 5 weeks
The TPL 503 sensor, installed directly on the transformer, transmits the temperature, pressure and oil level values ​​to the BB211 control unit, interfaced with remote data acquisition systems and connected to monitoring systems. protection via dedicated alarm contacts. The TPL 503 sensor is resistant to temperatures between -20 ° C and + 120 ° C; it is completely transparent so that you can see the oil; It is hermetic and is connected to the control unit by a special cable. The sensor head can be unscrewed to top up the oil and can be attached to 3 or 4 pins.  The assembly is compatible with all hermetic transformers from new global manufacturers and from manufacturers already installed.

Product features TPL503 + BB211 controller

Oil bath transformerLe new TPL503 SYSTEM   (control unit BB211 + sensor TPL503 ) represented innovation 4.0 for the protection of hermetically sealed oil transformers.

The conventional electromechanical control devices are replaced by the electronic sensor TPL503 which, installed directly on the transformer, is capable of monitoring and transmitting the oil data detected TEMPERATURE, PRESSURE and LEVEL to the BB211 control unit.

L' unit of control BB211 protects the transformer by means of appropriate alarm contacts and transmits the information to a remote center for PREVENTIVE MAINTENANCE.

It is equipped with 3 indicator lights: T = Temperature, P = Pressure, L = Level for indicating alarms with bright colors.

The flashing LEDs indicate the fault conditions (FAULT) of the control unit, which has registers dedicated to the storage of possible alarms, the maximum values ​​reached by the temperature and pressure parameters and the minimum value for the level parameter.

It also supplies the TPL 503 and receives information on the status of the transformer.

The compact dimensions and the DIN rail mounting system allow it to be installed in a wide variety of control boxes.

Connection diagram

TPL503

These products can interest you

Delivery in 3 to 5 weeks
NT511AD controller

NT511AD controller

APPLICATION The NT511 is a combined unit to control the temperature of dry transformers and the power ...
Delivery in 3 to 5 weeks
NT133-3 controller

NT133-3 controller

The NT133-3 is a complete and simple unit, for sophisticated temperature control of power transformers ...
Delivery in 3 to 5 weeks
T1048 controller

T1048 controller

APPLICATION The new product, born from the technical evolution of the T2612 series, integrating all the new functions ...
Delivery in 3 to 5 weeks
MT4X4 Controller

MT4X4 Controller

APPLICATION The new MT4X4 control unit represents, for Tecsystem, the first product for reading ...
Delivery in 3 to 5 weeks
T30 controller

T30 controller

APPLICATION The T30 is a simple device for thermal control of dry types LV and MV and transformers ...
Delivery in 3 to 5 weeks
MM453 AD controller

MM453 AD controller

APPLICATION Suitable for temperature control of diesel generators and biogas, it is also designed ...
Delivery in 3 to 5 weeks
ETH MANAGER SOFTWARE

ETH MANAGER SOFTWARE

The ETH Manager software, associated with the devices of the Tecsystem ETH series, allows you to monitor, adjust and analyze ...
Delivery in 3 to 5 weeks
PTSE temperature sensor

PTSE temperature sensor

Pt100 sensor 2500mm shielded cable with 3 conductors Temperature range: -40 ° C to + 200 ° C Degree of protection IP67