The complete solution for monitoring temperature, humidity and other values. For use on the desk with rubber feet - see Optional Accessories. For 19 "rack mounting - one 1U rack unit.
Data loggers are designed to measure, record, evaluate and further process input electrical signals, which are subject to relatively slow changes (> 1s). In conjunction with the appropriate sensors and transducers, they are suitable for monitoring physical quantities.
The device includes a traceable calibration certificate with declared metrological traceability of standards based on the requirements of EN ISO / IEC 17025.
The calibration sheet is always loaded as modules.
If the input requirements defined by, the calibration certificate proves the calibration entries against the required configuration - more than one range for each of the 16 inputs.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- USB cable
- Relative humidity
- Two state signal
- Event log
Total memory capacity: 2 MB (up to 480 values)
Type of memory: Internal SRAM, backed up by lithium battery
Recording modes: non-cyclic data - logging stops after filling the cyclic memory - after filling the memory, the oldest data is overwritten with new ones
Data logging interval: individually adjustable for all input channels from 1 second to 24 hours
Real time clock: year, leap year, month, day, hour, minute, second, backed up by lithium battery
AD converter resolution (analog channels): 16 bits, conversion time approx.60 ms / channel
Communication speed: 9600, 19200, 57600, 115200 Bd, 230400 * Bd (* applicable for USB, Ethernet)
Power : 24Vdc, consumption of the data logger itself approx.80 mA
Operating temperature range: 0 to + 50 ° C
Dimensions including connectors: 483 x 230 x 44 mm (W x D x H) - one 1U rack unit
Dimensions (without rack holder): 225 x 230 x 44 mm (W x D x H) - one 1U rack unit
Weight: approx. 800 g
Warranty: 3 years