Universal data logger with 4 hardware MiniDIN inputs for connecting temperature and humidity probes.
Multilogger can be permanently installed on an Ethernet network or function as a portable device.
Included is a traceable calibration certificate in accordance with EN ISO / IEC17025.
The Multilogger is a battery-powered data logger capable of measuring and recording sensor and electrical values through its inputs.
The data logger can be connected to Ethernet.
The measured values can then be viewed on a web browser, stored and downloaded for later analysis.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 3 AA rechargeable batteries
- Power source
- USB cable
- Wall bracket
- FREE Analysis Software
External probes are not included.
- Relative humidity
- Calculated values (dew point, etc.)
Temperature range : -10 to + 60 ° C
Humidity operating range: 5% to 85% RH, non-condensing
Temperature compensation of humidity sensor: the whole temperature range
Measuring interval: 1s to 24 hours
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory capacity (approx.): 1 values (non-cyclic recording), 000 values (cyclic recording)
Communication interface: Ethernet, USB, RS232
Communication protocols: Ethernet WWW, SNMPv1, XML, DATALINK
Alarm protocols: Email
Configuration: CWWW onfiguration
Power : 230Vac / 5Vdc mains adapter (required for the Ethernet interface)
: Rechargeable NiMH batteries 3x 1.2V AA (emergency or portable application) or alkaline batteries 3x 1.5V AA (for portable applications)
Power cable : coaxial, diameter 5.5 x 2.1mm
dimensions: 178 x 95 x 37 mm (W x H x D), without cables attached