Universal data logger with 4 hardware inputs.
Multilogger can be permanently installed on a network Ethernet or operate as a portable device.
Included is a traceable calibration certificate Complies with EN ISO / IEC17025.
The Multilogger is a battery-powered data logger able to measure and record the sensor values of electricity through its inputs.
The data logger can be connected to Ethernet.
The measured values can then be visualized on a web browser, stored and downloaded for later analysis.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 3 AA rechargeable batteries
- Power source
- USB cable
- Support mural
- FREE Analysis Software
External probes are not included.
- Relative humidity
- Calculated values (dew point, etc.)
Temperature range : -10 to + 60 ° C
Humidity operating range: 5% to 85% RH, non-condensing
Temperature compensation of humidity sensor: the whole temperature range
Measuring interval: 1s to 24 hours
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory capacity (approx.): 1 values (non-cyclic recording), 000 values (cyclic recording)
Communication interface: Ethernet, USB, RS232
Communication interface: WWW, SNMPv1, XML, DATALINK
alarm protocols: E-Mail
Configuration: WWW configuration
Power : 230Vac / 5Vdc mains adapter (required for the Ethernet interface)
: Rechargeable NiMH batteries 3x 1.2V AA (emergency or portable application) or alkaline batteries 3x 1.5V AA (for portable applications)
Power cable : coaxial, diameter 5,5 x 2,1 mm
Dimensions: 178 x 95 x 37 mm (W x H x D), without cables attached