The thermometer (hygrometer) is designed for measuring and recording data of temperature, relative humidity in internal non-volatile memory.
The free PC program allows you to transfer the data saved on your computer for evaluation.
The data logger is connected to the PC via an included USB cable only for transferring data from memory.
During the connection with the PC, no measurement and recording is activated.
Simultaneous temperature and relative humidity reading, selectable dew point temperature reading, external temperature-humidity probe with 1 meter cable.
Cable lengths of 2 and 4 meters are available as an option.
The diameter of the probe is 18 mm and its length is 135 mm.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 9V battery
- Mini USB cable
- Plastic transport case
- Self-adhesive dual lock for easy installation
- FREE COMET Vision analysis software
Operating temperature range: -10 to + 60 ° C
Temperature sensor : RTD Ni1000 / 6180ppm
Accuracy of temperature measurement with integrated sensor: ± 0.4 ° C
Accuracy of air humidity measurement: ± 2,5% RH from 5 to 95% at 23 ° C, resolution 0,1%
Dew point measurement accuracy: 1,5 ° C at room temperature <25 ° C and RH> 30%, range -50 to +80 ° C
Power : 9V batteries
Battery life: 4 months on average
Real time clock: year, leap year, month, day, hour, minute, second
PC interface: USB
Sampling interval in data logging mode: 10 to 24 hours (18 adjustable intervals)
Total memory capacity: up to 16 recorded values
Data logging modes: non-cyclic - data logging stops after filling the memory
cyclic - after filling the memory, the oldest data is overwritten by the new ones
dimensions: 141 x 71 x 27 mm, probe length 135 mm, probe diameter 18 mm
IP protection: IP20
Weight (with battery) without probe: about 150g
Warranty: 3 years