Universal data logger with 4 hardware inputs and internal CO2 sensor.
Multilogger can be permanently installed on an Ethernet network or function as a portable device.
Included is a traceable calibration certificate in accordance with EN ISO / IEC17025.
The device is designed to measure and record temperature, humidity, CO2 (internal sensor) with adjustable recording intervals from 1 second to 24 hours.
The data logger can be connected to Ethernet.
The measured values can then be viewed on a web browser, stored and downloaded for later analysis.
- Online monitoring
- Data logging
- Alarm warnings
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 3 AA rechargeable batteries
- Power source
- USB cable
- Wall bracket
- FREE Analysis Software
External probes are not included.
- Relative humidity
- Calculated values (dew point, etc.)
- Two state signal
Temperature range : -10 to + 60 ° C
Humidity operating range: 5% to 85% RH, non-condensing
Temperature compensation of humidity sensor: the whole temperature range
Measuring interval: 1sec to 24 hours
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory capacity (approx.): 1 values (non-cyclic recording), 000 values (cyclic recording)
Communication interface: Ethernet, USB, RS232
Communication protocols: Ethernet WWW, SNMPv1, XML, DATALINK
Alarm protocols: Email
Configuration: WWW configuration
Power : 230Vac / 5Vdc mains adapter (required for the Ethernet interface)
: Rechargeable NiMH batteries 3x 1.2V AA (emergency or portable application) or alkaline batteries 3x 1.5V AA (for portable applications)
Power cable : coaxial, diameter 5,5 x 2,1 mm
dimensions: 178 x 95 x 37 mm (W x H x D), without cables attached