Universal recorder with 4 analog inputs.
The Multilogger device can be used permanently on an Ethernet network or as a portable device.
Calibration certificate traceable in accordance with EN ISO / IEC17025
The "Multilogger" recorder operates on batteries and is able to measure and record sensor information and electrical values via the inputs offered.
The recorder can be connected via Ethernet.
The data is then visible via a web browser and is also stored for later analysis.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 3 AA rechargeable batteries
- Power source
- USB cable
- Wall bracket
- FREE Analysis Software
- Two state signal
Temperature operating range: -10 to + 60 ° C
Relative humidity operating range: 5% to 85% RH, non-condensing
Relative humidity sensor temperature compensation: the whole beach
Measuring interval: 1 second to 24 hours
available units: degrees Celsius, Fahrenheit
Calculated variables: Dew point, absolute humidity, specific humidity, mix ratio, etc.
Memory capacity: 1 in non-cyclic memory, 000 values (in cyclic memory)
IP protection index: IP20
Communication interface: Ethernet, USB, RS232
Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK
Alarm protocols: Email
Configuration: WWW configuration
Supply : 230Vac / 5Vdc mains adapter (compulsory for ethernet interface)
: rechargeable NiMH3x 1.2V AA batteries or 3x 1.5V AA batteries
connector type: co-axial, diameter 5.5 x 2.1mm
dimensions: 178 x 95 x 37mm (L x W x PD), without cable