The ThermaData Lite data logger is a temperature data logger autonomous and economical or a blind recording thermometer designed to record the temperature of the environment.
The ThermaData Lite recorder is housed in a water resistant polyethylene housing and incorporates two LED status indicators.
ThermaData Studio software allows the user to program sample rate / logging interval (6 seconds to 255 minutes), real time clock, ° C / ° F, delayed start (maximum 23 hours, 59 minutes), button start - push button, temperature start or time start and a 31 character user ID.
The software also integrates a calibration adjustment function Password protected that allows the user to verify logger calibration and make minor adjustments of 0,1 ° C (± 3 ° C).
The user can also set high and low alarm values in the software for a specific application.
Pressing the button will allow a simple visual inspection of the unit to see if any of these limits have been exceeded.
A flashing red LED will alert the user that the alarm limits have been exceeded (reject) or a flashing green LED will alert the user that the alarm limits have not been exceeded (accept).
Beach: -40 to 85 ° C
Resolution: 0,1 ° C
Accuracy: ± 0,5 ° C
Memory : 16000 readings
Sampling rate: 6 seconds to 255 minutes
Drums : 3,6 volts half AA lithium
Autonomy: 3 years minimum
Display: 2 LED
dimensions: 55 x 25 mm
Weight: 40 grams
Housing material: plastic
Warranty: two years
Measuring scale : Celsius