Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Bimetal probe wired with tube and stainless steel fitting diameter 10mm

Delivery in 3 to 5 weeks

TSB 060 series bimetal temperature sensors are designed as two-state controllers (ON / OFF control) that compare the preset and instantaneous temperature and immediately disconnect the contact when a set temperature is reached. The required temperature is defined according to customer needs by selecting a bimetallic thermal break and can not be changed.  

Product features Bimetal probe wired with tube and stainless steel fitting diameter 10mm

Switches bimetallic TSB 060 series consist of a stainless steel housing containing a bimetallic switch (thermal break) and a power cable.

Bimetallic switches of the TSB 060 series are used to signal temperature overshoot in various industrial applications, for example to protect transformers, power semiconductor stages, motors and high power batteries. The bimetallic switches of the TSB 060 series are designed to work in chemically non-aggressive environments.

Wired bimetal probe diagram with tube and stainless steel fitting diameter 10mm

Type of switch TSB 060
Temperature sensor TMC bimetallic - C1B
Temperature range 
(selection of the trigger temperature)
70 to 180 ° C
Switching tolerance ± 5 ° C
Contact design normally closed (instant action)
Maximum voltage / switching current 10.000 cycles 250VCA / 2,5A 
3.000 cycles 250VCA / 6,3A
Housing DIN 1.4301 stainless steel
Case diameter 10 mm
Case length 35 mm with thread
Thread type / OK
M14 x 1.25 / OK17
Working range -25 to 180 ° C
Ingress protection IP 67 according to EN 60529
Isolation resistance 
in a normal environment
min. 20 MΩ
Dielectric strength of the insulation 2 kVAC / 1 min.
Contact connection 2 fils
Power cable shielded silicon 2 x 0,34 mm 2
Weight min. 0,2 kg acc. design

These products can interest you