Control and alarm function, 1 programmable input for different sensors
This 32x74 temperature controller and processor with 4-digit display is characterized by high configurability, which results in a small number of product codes. The input is programmable for temperature sensors, thermoresistors and thermocouples, but also for pressure transmitters, humidity and flow sensors. The hot cold PID adjustment algorithm is optimized for temperature regulation and process control with rapid regulation of transient pressure and flow regulation.
The only 4-digit display is optimized for process visualization with standardized signals, speed / RPM views on inverter, temperature displays above 1000 ° C.
Controller outputs can be selected as control / multiple alarm / event mode. The serial communication option is RS485 with Modbus / Slave protocol.
Ease of use, media support and traceability
Across the entire Pixsys product line, we provide support for installation, programming and operation.
The ATR141 PID controller interface offers user-friendliness, which is also supported by programming aids such as MEMORY-CARD or LABSOFTVIEW parameterization software.
They are available in the video channel YouTube for programming.
As with the entire range of PIXSYS products, thanks to the QR code, product traceability is guaranteed throughout its life cycle; Access to information and online documentation is also available on mobile by reading the QR code which refers to the technical specifications of the product and to the verification of the warranty conditions.
32x74 (front panel) x 53 mm
12 ... 24 V AC / DC or 24Vac / 115V AC / 230VAC ± 15% 50/60 Hz- (galvanic isolation 2500V, not for AD-ADT)
2,6 VA (code AD, ADT) 4,4 VA (code B), 5,7 VA (code C), 2,4 VA (code AV, ADT)
List it Now
4 digits, 0,4 "red + 3 signaling LEDs
Temperature 0-45 ° C, humidity 35..95 RH% (non-condensing)
Box: polycarbonate; Front panel: self-extinguishing UL94V0 ABS
IP54 front panel, IP30 box, IP20 terminal block
Quick setup options
Memory card with / without battery, LABSOFTVIEW software
Res. 16 bits, selectable for TC type K, S, R, J, (automatic compensation of the cold junction o ... 50 ° C, ± 0,2% FS ± 1 Digit FS), thermostance PT100, PT500, PT1000, Ni100 , PTC1K. NTC10K, (ß 3435K), process signals 0..10V (40000 points), 0 / 4..20mA (30000 points), potentiometer 6KΩ, 150 KΩ (40000 points)