ATR142-ABC

ATR142

GATR142R
In production :  3 to 5 weeks

ATR142-ABC

1 analog input + 2 relays + 1 digital PNP / Supp. 24 ... 230 V AC / DC

ATR142-ABC-T

1 analog input + 2 relays 8 A + 1 SSR 12VDC / Supp. 230VAC

Quantity

International shipping

FREE shipping in Europe from 100 € of purchase

Secure Payments

All payments are secure and approved.

Best price guarantee

Contact us to define your payment term.

+33-233-611-670

English - French - German - Spanish

PID regulator 32x74 mm ATR142

Control and alarm function, programmable input for different sensors, multi-voltage power supply

This 32x74 regulator with double 4-digit display is characterized by a large configurable inputATR142 PIXSYS and a 24 'galvanically isolated 230 Volt AC / DC multi-voltage power supply that does not require hardware selections. This boils down to a single product code, which is among the most versatile in the 32x74 format. The input is programmable for temperature sensors, thermoresistors and thermocouples, but also for pressure transmitters, humidity and flow sensors. The cold-hot PID adjustment algorithm is optimized for temperature regulation and process control with rapid transient pressure regulation and flow regulation.

The features of the ATR142 software also include the timer, in the option of delayed setting or time setting.

Controller outputs can be selected as control / multiple alarm / event mode. The serial communication option is RS485 with Modbus / Slave protocol.

Ease of use, media support and traceability

Throughout the Pixsys product line, we provide support for installation, programming and operation.

The interface of the ATR142 PID controller ensures ease of use for the user, which is also supported by programming aids like MEMORY-CARD or LABSOFTVIEW parameterization software.

They are available in the video channel UAF YouTube for programming.

As with the entire range of PIXSYS products, thanks to the QR code, product traceability is guaranteed throughout its life cycle; Access to online information and documentation is also available on mobile by reading the QR CODE which refers to product specifications and warranty conditions.

YOUTUBE programming video

Key Features

  • 32x74 (front panel) x 53 mm
Power source
  • 24 ... 230V AC / DC ± 15% 50/60 Hz, (galvanic isolation 2500V)
Consumption
  • 4,65 VA
List it Now
  • 4 digits 0,4 "green + 4 digits 0,3" red + 6 signaling LEDs
Operating conditions
  • Temperature 0-45 ° C, humidity 35..95 RH% (non-condensing)
Material
  • Box: polycarbonate; Front panel: self-extinguishing UL94V0 ABS PC
Weight
  • About. 112 g
Sealing
  • IP54 front panel, IP30 box, IP20 terminal blocks
Quick setup options
  • Memory card with / without battery, LABSOFTVIEW software, EASY-UP code

Starter

1 analog
  • Res. 16 bits, selectable for TC type K, S, R, J, (automatic compensation of the cold junction 0..50 ° C, ± 0,2% FS ± 1 Digit FS), thermoresistor PT100, PT500, PT1000, Ni100, PTC1K. NTC10K, (ß 3435K), process signals 0..10V (54000 points), 0 / 4..20mA (40000 points), 0..40mV (16000 points), potentiometer 6KΩ, 150 KΩ (50000 points)
Sampling time
  • 4,1 ms (frequency from 4,12 Hz to 242 Hz)
1 digital input
  • PNP, setpoint selection 1/2, Hold, Run Auto / man regulation, tuning start, pre-programmed start (only with TC sensor, 0 ... 10V, 0/4 ... 20mA, 0 ... 40mV )

The exits

2 relays
  • 1 Relay 8A - Resistive load 250 VAC + 1 Relay 5A - Resistive load 250 Vac
1 digital
  • 12 VDC - 30 mA for SSR control
Serial communication
  • RS485 Modbus RTU - Master / Slave
1 Auxiliary
  • 12 VDC - 30 mA for external sensor supply

Software features

Control algorithms
  • ON - OFF with hysteresis, P., PI, PID, PD proportional to time, dead band
Setting
  • Manual or automatic
Data protection
  • Command / alarm set point - Access to parameters by password
Alarm modes
  • Absolute / Threshold, band, High / Low deviation. Alarm with optional manual reset
Soft-Start
  • Ascending gradient expressed in degrees / hour
Dual PID
  • Heating / cooling PID
Scheduler function
  • Start / Stop, 3 preprogrammed cycle steps
Timer function
  • Controller function + single / double timer
Opening / closing logic
  • Open / Close logic for motorized valves
Set point
  • 3 set points

Information

Measured
Temperature
Product Type
regulators
Communication
RS485 - MODBUS
Regulator type
32x74mm
Related products (8 other products in the same category)

ATR421

ATR421-12ABC-T1 Analog input + 2 Relays + 1 digital PNP + 1 Analog 0 / 4..20mA / 0..10V + RS485 / Alim. 24 ....
3 to 5 weeks

ATR244

ATR244-12ABC 1 analog input + 2 relays 5 A + 2 SSR + 2 DI + 1 analog output V / mA ATR244-12ABC-T1 In analog ...
3 to 5 weeks

ATR227

ATR227-11ABC 2 relays + 1 digital PNP + DI
3 to 5 weeks

ATR902

ATR902-12ABC1 Analog Inp. + 2 relays 1A -230 V AC / DC
Price 238,00 €
2 products In stock

ATR621

ATR621-12ABC1 Analog input + 2 Relays 8 A + 1 SSR 12Vdc + 1 Digital input ATR621-13ABC-T1 Analog input + ...
3 to 5 weeks

TCT101

TCT101-1ABC Timer - adjustable in 5 modes TCT101-2ABC Counter - incremental or decremental TCT101-3ABC Tachometer - p ...
3 to 5 weeks

ATR144

ATR144-ABC 1 analog input + 2 relays 5 A + 1 DI / O - 24..230 V AC / DC power supply ATR144-ABC-T 1 input ...
3 to 5 weeks

ATR401

ATR401-22ABC 2 analog inputs + 2 relays + 1 digital PNP, Supp. 24 ... 230 V AC / DC ATR401-22ABC-D2 Analogue in ...
3 to 5 weeks

Create account