The TCT201 series is available in different configurations: timer, counter, tachometer / frequency counter.
TCT201-1ABC adjustable in 5 modes: Timer ON, stop of the timer, Pause, Oscillation, PWM (time proportional output), all with independent ON-OFF time adjustment. TCT201-2ABC configurable as single / double counter, incremental counting and decrement with possibility of adjustment from an external potentiometer
Ease of use, media support and traceability
We provide support for installation, programming and operation.
The TCT201 timer interface guarantees the friendliness , which is also supported by programming aids such as the MEMORY-CARD or LABSOFTVIEW configuration software.
They are available in the Video tutorial youtube for programming.
As with the entire PIXSYS product range, thanks to the QR code, product traceability is guaranteed throughout their life cycle; access to online information and documentation is also available on mobile by reading the QR CODE which refers to the product specifications and warranty conditions.
48x48 (front panel) x 107 mm
24 ... 230Vac / Vdc ± 15% 50/60 Hz
List it Now
4 digits 0,4 "green + 4 digits 0,3" red + led
Temperature 0-45 ° C, humidity 35..95 RU% (non-condensing)
Box: Noryl UL94V1 self-extinguishing; Front panel: self-extinguishing UL94V0 ABS PC
About. 350 g
Quick setup options
Memory card with / without battery
Selectable as NPN - PNP - TTL, both on the upper / lower / rising edge level
Selection of the inputs by potentiometer 5/10 KOhm for the adjustment of the set value (resolution 1000 points)
2 Relays 8 A - 250 Vac resistive load
Selection of timer inputs
Start, Stop, Maintain, Reset, Wait
Programmable Base time sec / 100, sec / 10, sec, min, hours
Choice of counter inputs
Up, Down, Lock, Hold
Incremental / Describing up to 100Khz
Display of the counting frequency on the red display for the flowmeter function
Password protected settings
RS485 - MODBUS
(8 other products in the same category)