Product features Thermometer with Ethernet interface and relay
Ethernet temperature sensor for Pt1000 sensors with two relay outputs.
The sensor is designed for online temperature monitoring.
Three binary inputs for two-state signal detection are the advantage.
The other devices are controlled by two relay outputs.
Processing and analysis of measured data:
- Online in Cloud
- Database software
- Integration into third-party systems
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Cloud for 3 months
- Two state signal
Accuracy of temperature output: ± 0.2 ° C (Without temperature probe)
Measuring interval: 2s
Available units: Degrees Celsius, Fahrenheit
Temperature operating range: -30 to + 80 ° C
Protection sign : IP40
Number of relay outputs: 2
Maximum power of the voltage and current relay: 50V, 2A, 60VA
Number of binary inputs: 3
Signal for binary inputs: From voltage free contact, open collector or two state voltage signal.
The inputs are not galvanically isolated.
Minimum pulse duration at binary input: 500ms
low voltage at binary input: 0 to + 0.5V
high voltage at binary input: +3.0 to + 30V
audible alarm: integrated - can be deactivated
LAN connection: RJ-45, 10Base-T or 100Base-TX connector
Communication protocol : WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocols: E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration: T-Sensor, Telnet, keyboard
LCD screen operating temperature: Reading possible up to + 70 ° C, it is recommended to switch off the LCD screen above + 70 ° C
Supply : 9 to 30Vdc, consumption about 1W
Power cable : Coaxial, diameter 5,5 x 2,1 mm
Type of probe: Pt1000 / 3850, shielded cable maximum length 10 m
Dimensions: 136 x 160 x 45 mm (W x H x D)
Weight: about 340g
Warranty: 3 years