Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Probe diameter 5,8mm, -40 to 105 ° C

Reference G01.05

Delivery in 3 to 5 weeks
  • Resistance sensors.
  • Measure the temperature of gases and liquids.
  • PVC input cable with insulation and shielding.
  • In combination with the stainless steel thermowell.
508.19KB Download

Datasheet G01.05 | 5,8mm diameter probe, -40 to 105°C

Product features Probe diameter 5,8mm, -40 to 105 ° C

ACCESSORIES

  • JTG8 stainless steel thermowell
  • Connectors
  • Screw with collar or clamping rings - if different immersion lengths of the temperature sensor are required

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides a EU declaration of conformity.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. 
  • The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility of supplying calibrated sensors in our laboratory (according to the requirements of standard EN ISO / IEC 17025).  

Sensor type G01.05 G01.05J
Use Case general for JTG 8 thermowells
Measuring range
-40 to 105 ° C (may be limited by cable type)
Sensitive element type all types 
(Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226 = T1, NTC, PTC, KTY, 
TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Protection sign IP 67 according to EN 60529
Housing stainless steel DIN 1.4571; 1.4301
Diameter of the case
5.8 mm
Case length L
40 and 60 mm
Input cable PVC shielded 2 x 0,34 mm 2 or 4 x 0,25 mm 2 (-40 to 80 ° C) 
Unshielded PVC 2 x 0,35 mm 2 or 4 x 0,35 mm 2 (-40 to 105 ° C)
Wire resistance 0,11 Ω for 1 m cable for 2-wire connection
Response time
τ 0,5 <7 s (in white water 0,4 ms) -1 ) τ0,9 <45 s (in white water 0,4 ms -1 )

These products can interest you