Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Probe with connection head - IP68

Delivery in 3 to 5 weeks
  • Resistance temperature sensors.
  • Contact temperature measurement.
  • Range of -50 and 400°C.
  • Operates in a chemically non-aggressive environment.
296.71KB Download

Data sheet GPTS441R | Connection head probe - IP68

Product features Probe with connection head - IP68

DESCRIPTION AND APPLICATION

All of this resistance sensors are designed to measure temperatures by contact ranging up to 400°C. Temperature sensors, combined with a central support or a thermowell, can be used to measure temperature in various applications in an industrial environment.

The sensor variant with welded thread is ideal for direct measurement of fluids in pipes. Sensors respond to protection level IP 68 in accordance with EN 60529. The standard operating temperature range is between -50 and 400 ° C.

The sensors can be used for any compatible control system with the sensing element output signals or the output signals shown in the sensing element type table. The sensors are designed to operate in a chemically non-aggressive environment.

ACCESSORIESIP68 connection head probeIp68 head probe

  • central metal support K 120
  • JPTS 41 stainless steel thermowell
  • screw with collar or cutting rings - if different immersion lengths of the temperature sensor are set

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides an EU declaration of conformity.
  • Calibration - Final metrological control
  • Features
  • Cable schematics
  • Dimensional draft
  • Download
Sensor type with smooth rod 
Sensor type with welded screw connection
PTS 441 
PTS 461
PTS 443 
PTS 463
PTS 445 
PTS 465
Sensitive element type
100 pt 500 pt 1000 pt
Class B measuring range
-50 to 400 ° C
Maximum continuous current
3 mA 1.5 mA 1 mA

Probe with connection head - IP68

Type of smooth rod sensor 
Type of sensor with welded thread
PTS 451 
PTS 471
Footnotes
Sensitive element type
Point 1000/3850
Output signal
4 to 20 mA
Measuring ranges
-50 to 50 ° C 
0 to 100 ° C 
0 to 150 ° C 
0 to 200 ° C 
0 to 400 ° C
ambient temperature around the connection head -30 to 70 ° C
Power supply (U)
11 to 30 V DC recommended value 24 V DC
Load resistance
150 Ω for 12 VDC power supply 
700 Ω for 24 VDC power supply
Output signal - detection element failure
> 25 mA
Output signal - detection element short circuit
<3.5 mA

OTHER PARAMETERS
Precision class
Class B according to EN 60751, Δt = ± (0.3 + 0.005 | t |) in ° C
Measurement error
<0,6% of the measuring range, minimum 0.5 ° C
Sensor connection
according to the wiring diagram
Standard length of rod L1
50, 100, 160, 220, 280, 400 mm
Nominal rod pressure
PN 63 (with wire)
Response time
τ0,5 <9 s (in white water 0,4 ms -1 )
Recommended wire section
0,35 to 1,5 mm 2
Thead types for PTS 61, PTS 63, PTS 65, PTS 71 G 1/2 "; M 20 x 1,5; M 27 x 2
Insulation resistance
> 200 MOhm at 500 V DC, 25 ° C ± 3 ° C; humidity <85%
Protection sign
IP 54 according to EN 60529
Material of the stem
DIN 1.4301 stainless steel
Connection head material
LIMATHERM B aluminum alloy
Working conditions
ambient temperature: -30 to 100 ° C; -30 to 70 ° C with converter 
relative humidity: max. 100% (at room temperature 25 ° C)
atmospheric pressure: 70 to 107 kPa

Weight

about 0,25 kg

MAXIMUM FLOW SPEED OF MEASURED MEANS - AIR AND WATER / WATER VAPOR [ms -1 ]

Length of thermowell / rod > 60 to 100 mm > 100 to 160 mm > 160 to 220 mm > 220 to 400 mm
Values ​​for the version with thread
15 / 1.5 8.0 / 1.0 2.5 / 0.6 0.6 / 0.3

Note: manufacturer reserves the right to modify the design and technical characteristics of the products. For real information, please always contact your dealer.

These products can interest you