Fast response temperature probe - plastic connection head

Fast response temperature probe - plastic connection head *Step required

In production :  3 to 5 weeks
Description and application

These resistance sensors are designed to measure the contact temperature of liquid or gaseous substances. The plastic connection head has a cable outlet (the terminal block is placed in the connection head) or a connector. The structure of the sensor rod allows the sensor to be used for direct measurement of temperature in conduits and also guarantees a quick response of the sensor to temperature changes. The standard operating temperature range is between -30 and 130 ° CThe sensors can be used for any control system compatible with the output signals from the sensing elements or the output signals shown in the table of sensing element types. The temperature sensor is easy to mount thanks to the design unique " S-head "

Unit price
39,56 €
Final price
39,56 €
Your configuration:

International shipping

FREE shipping in EU from 70 € HT purchase

Secure Payments

All payments are secure and approved.

Best price guarantee

Contact us to define your payment term.

+33-233-611-670

English - French - German - Spanish

ACCESSORIES

  • CONEC 43-00092 input connector
  • Connection cable with straight connector RKt or rectangular connector RKWt

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides an EU declaration of conformity.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. Continuity of standards and measuring instruments for working on metrology. The manufacturer offers the possibility of supplying the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.  
  • Features
  • Cable schematics
  • Dimensional draft
  • Download



Fast response temperature probe - plastic connection head
Sensor type 
(K - with connector)
NS 160 
Ns 160K
NS 161
NS 161K
NS 162 
NS 162K
Sensitive element type Ni 1000/5000 Ni 1000/6180 Ni 891
Measuring range -30 to 130 ° C (ambient temperature of the connection head -30 to 100 ° C)
Maximum continuous current 1 mA 1 mA 1 mA

Sensor type 
(K - with connector)
PTS 160 
PTS 160K
PTS 260 
PTS 260K
PTS 360 
PTS 360K
HS 120 
HS 120K
Sensitive element type Pt 100/3850 Pt 500/3850 Pt 1000/3850 20 kΩ NTC thermistor
Measuring range -50 to 130 ° C (ambient temperature of the connection head -30 to 100 ° C) -30 to 130 ° C
Maximum continuous current 3 mA 1,5 mA 1 mA 10 mW *)

*) maximum power consumption

Sensor type 
(K - with connector)
NS 560
NS 560K
NS 760
NS 760K
Notes
Sensitive element type Pt 1000/3850 Pt 1000/3850
Output signal 4 to 20 mA 0 to 10 V
Measuring ranges -50 to 50 ° C 
-30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 
0 to 150 ° C

-30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 0 to 150 ° C
ambient temperature around the connection head -30 to 70 ° C
Power supply (U) 11 to 30 V DC 15 to 30 V DC recommended value 24 V DC
Load resistance 150 Ω for 12 VDC power supply 
700 Ω for 24 VDC power supply
> 10 kΩ
Output signal 
breaking the sensitive element
> 24 mA > 10,5 V
Output signal 
- short sensitive element
<3.5 mA ~ 0 V


**) Depending on customer requirements, it is possible to provide a custom measurement range from -40 to 150 ° C; 
the minimum range of the range must be 35 ° C (for example, -20 to 15 ° C; -30 to 80 ° C)

OTHER PARAMETERS
Precision class Elements sensitive to Ni: class B, Δt = ± (0,4 + 0,007t), for t ≥ 0; Δt = ± (0,4 + 0,028 | t |), for t ≤ 0 in ° C; 
Elements sensitive to pt: class B according to EN 60751, Δt = ± (0,3 + 0,005 | t |) in ° C 
NTC 20 kΩ: ± 1 ° C for the range from 0 ° C to 70 ° C
Measurement error 
for NS 560, NS 760
NS 560, NS 760 <0,6% of the measuring range, minimum 0.5 ° C
Sensor connection according to the wiring diagram
Standard length of rod L1 50, 100, 160, 220 mm
Diameter of the stem 4 ± 0.1 mm
Standard thread G 1 / 2 "
Nominal rod pressure PN 25
Response time τ 0,5 <9 s (in white water at 0,4 ms -1 )
Recommended wire section - 
sensors with grommet
0,35 to 1,5 mm 2
Connector type in 
sensors head with connector
RSFM4 - Lumberg
Isolation resistance > 200 MOhm at 500 V DC, 25 ° ± 3 ° C; humidity <85%
Ingress protection IP 65 according to EN 60529
Sensor rod material DIN 1.4301 stainless steel
Connection head material POLYAMIDE
Operating conditions ambient temperature: -30 ° C to 100 ° C; -30 ° C to 70 ° C with converter 
relative humidity: max. 100% (at room temperature 25 ° C) 
atmospheric pressure: 70 to 107 kPa
Weight about 0,15 kg

MAXIMUM FLOW SPEED OF THE MEASURED MEDIUM - AIR AND WATER / WATER VAPOR [ms -1 ]
Length of the stem up to 60 mm > 60 to 100 mm > 100 to 160 mm > 160 to 220 mm
Values ​​for rod diameter 4 mm Zones Zones Zones Zones

SENSOR INSTALLATION AND MAINTENANCE:

Before connecting the power cable, indicate the position of the probe at the location of the temperature measurement.

CABLE CONNECTION:

Before connecting the power cable, use a flat screwdriver. The input cable is connected to the terminals as shown in the diagram through the loose eyelet. The recommended wire section is 0,35 to 1,5 mm2. The diameter of the circular section cable can range from 4 to 8 mm. For IP 65 protection, the grommet must be tightened and the cover must be put on after connecting the input cable.

SENSORS WITH CONNECTOR:

According to the wiring diagram, the input cable is connected to the RSFM4 connector, which is part of the sensor head. As an option, the CONEC 43-00092 standalone connector or a 5 m long input cable fitted with a straight RKT type connector, a rectangular RKWT type connector can be supplied. In case the input of the electromagnetic field (for example, equipment with inductive load), a shielded cable must be used. After installing and connecting the sensor to the equipment, the probe is ready to use. The sensor does not require any particular maintenance. The device can be used in any working position, but the eyelet must not point upwards.

MODIFICATION AND CUSTOMIZATION:

FOR THE STANDARD DETECTORS MANUFACTURED, THE FOLLOWING PARAMETERS CAN BE MODIFIED
- Accuracy class A (except for the thermistor of the 20 kΩ NTC sensor)
- three or four wire connection option
- variable rod design - length, materials, diameters, possibility of thread design
- possibility of providing custom temperature ranges for temperature sensors with converter

Information

Measured
Temperature
Product Type
Head / terminal probes
Communication
0 ... 10V
4 ... 20mA
Related products (8 other products in the same category)

Create account