DESCRIPTION AND APPLICATION
All of this thermocouple temperature sensors with head are designed to measure temperatures up to 400°C. By combining a sensor and a central support or well in stainless steel, supplied as accessories, it is possible to use sensors for measuring temperature in various industrial applications, for example as pressure equipment within the meaning of Government Decree No. 26/2003 Coll. as amended.
The maximum allowable working pressure is 6,3 MPa (applies to a maximum case length of up to 300 mm). Thermocouple temperature sensors can be used for all control systems compatible with the type of thermocouple selected.
Type TCS 4x and tCs 6x thermocouple temperature sensors comply with the degree of protection IP 54
according to ČSN EN 60529, as amended. The standard measuring range of the TCS 4x and TCS 6x sensors is -50 to 400 ° C
. The range should not be exceeded, even for a short time. The maximum temperature around the head is 100°C.
The sensors are designed to operate in a chemically non-aggressive environment, the mode of use must be chosen taking into account the temperature resistance of the head and the chemical resistance of the housing and the head of the sensor.
- stainless steel sump JPTS 41 for types TCS 4K, TCS 4J, TCS 6K, TCS 6J
- metal support K 120
- sliding fitting - to adjust different immersion lengths of the temperature sensor rod
DECLARATION, CERTIFICATION, CALIBRATION
- The manufacturer issues an EU declaration of conformity.
- Calibration - All production is subject to output metrological control, which is carried out by comparison with standards or with working gauges. The continuity of working standards and gauges is ensured within the meaning of article 5 of law no. 505/1990 on metrology. The manufacturer offers the possibility of supplying sensors calibrated in the laboratory of SENSIT sro (in accordance with the requirements of ČSN EN ISO / IEC 17025, as amended) or in AKL.
|Sensor type with smooth rod
Sensor type with welded thread
||-50 to 400 ° C
||"J" and "K", single, double
||2 in accordance with EN 60584 and DIN 43 710, 1 other
||with an isolated measuring point
|Diameter of the stem
|Standard rod length
||50, 100, 160, 220, 280, 340 and 400 mm
|Nominal rod pressure
||PN 63 (with thread) up to 400 ° C and rod length 300 mm
|Thread types for variant with thread
||G 1/2 "; M 20 x 1,5; M 27 x 2; others on customer request
|Material of the stem
||DIN 1.4301 stainless steel
|Recommended wire section
||0,35 to 1,5 mm 2
||IP 54 acc. EN 60529
|Connection head type
|Connection head material
|Ambient temperature around the connection head
||-30 to 100 ° C