Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Probe diameter 5.8 mm, -50 ° C to 200 ° C

Reference G01.06

Delivery in 3 to 5 weeks
  • Resistance sensors.
  • Measure the temperature of gases and liquids.
  • Silicone insulation and shielding.
  • Allows you to enclose special sensors.
512.67KB Download

Datasheet G01.06 | Probe diameter 5.8 mm, -50°C to 200°C

Product features Probe diameter 5.8 mm, -50 ° C to 200 ° C

The maximum temperature range for use of the sensors is between -50 and 200 ° C.

The type of cable used has silicone insulation and shielding. 

The diameter of the protective tube also makes it possible to enclose special temperature sensors - KTY, SMT 160, DS 18B20, TSic, etc.

In combination with the JTG 8 thermowell, the sensor can be used to measure the temperature in pipes, as well as a device as defined in government regulation no. 26/2003 coll., As modified.

The sensors are designed for universal use, the method of use must be chosen according to the temperature and the chemical resistance of the cable and the power cable.

  • JTG 8 stainless steel thermowell
  • Connectors
  • Screw with collar or cutting rings - if different immersion lengths of the temperature sensor are set  


Sensor type G01.06 G01.06J
Use Case
general for JTG 8 thermowells
Measuring range
-50 to 200 ° C (may be limited by the type of cable, 
determine in documentation)
Sensitive element type
all types 
(Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226 = T1, NTC, PTC, KTY, 
TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Protection sign
IP 67 according to EN 60529
Case material
stainless steel DIN 1.4571; DIN1.4301
Diameter of the case
5.8 mm
Case length L
40 to 200 mm
Input cable
shielded silicone 2 x 0,34 mm 2
shielded silicone 4 x 0,22 mm 2
Wire resistance
0,11 Ω for 1 m cable for 2-wire connection
Response time τ0,5 <7 s 
(in white water at 0,4 ms-1)
τ0,5 <45 s 
(in white water at 0,4 ms-1)

These products can interest you