Mineral-insulated resistance temperature sensorscomply with the degree of protection up to IP 67 in accordance with standard EN 60529, depending on the type of thermo element and the production technology used.
The sheath diameter of 1,5 mm guarantees a very rapid response of the sensor to temperature changes. Mineral resistance temperature sensors are designed to operate in chemically non-aggressive environments, their use should be chosen according to a housing and a cable resistant to temperature and chemicals.
100pt, 500pt, 1000pt
Up to IP 67 according to EN 60529 according to. cable type
Jacket resistance sensor
Diameter of the piece to be measured
Length of the measuring part
from 50 to 300 mm as standard, others on request
Maximum temperature range (on the measuring tip)
-50 to 500 ° C (may be limited by the length of the measuring tip or by the variant of the power cable)
standard class B (class A on request)
stainless steel DIN1.4571
Minimum bending radius
10 times in diameter
Input cable variations / beach de temperature cable
Shielded PVC -30 to 80 ° C Unshielded PVC -40 to 105 ° C silicone -50 to 200 ° C armored teflon -50 to 250 ° C with fiberglass 0 to 400 ° C (with metallic braid)