
Product features Thermometer with Ethernet interface, relay and integrated sensor
TECHNICAL DATA
Ethernet sensor ambient temperature with two relay outputs.
The H0530 sensor is designed for online temperature monitoring.
Three binary inputs for two-state signal detection are the advantage.
The other devices are controlled by two relay outputs.
Processing and analysis of measured data
- Online in Cloud
- Database software
- Integration into third-party systems
INCLUDED IN DELIVERY
- AR004918
- Manual
- Traceable calibration certificate
- Free Tsensor configuration software
- Cloud for 3 months
MEASURED VALUES
- Temperature
- Two state signal
Temperature measurement uncertainty: ± 0.4 ° C
Resolution: 0.1°C
Measuring interval: 2s
Available units: Degrees Celsius, Fahrenheit
Temperature range : -30 to + 80 ° C
Protection sign : IP40
Number of relay outputs: 2
Maximum switching voltage, current and power of the relay output: 50V, 2A, 60VA
Number of binary inputs: 3
Signal for binary inputs: Dry contact, open collector, or two-state voltage signal.
The inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms
Low voltage level at binary input: 0 to + 0.5V
High voltage level at binary input: +3.0 to + 30V
Audible alarm: integrated - can be deactivated
LAN connection: RJ-45 connector, 10Base-T or 100Base-TX
Ethernet communication protocol: WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocol E-mail: (SMTP Authentication is supported), SNMP Trap, Syslog
Configuration: T-sensor, Telnet, keyboard
LCD screen operating temperature: Reading possible up to + 70 ° C, it is recommended to turn off the LCD screen at more than 70 ° C
Supply : 9 to 30Vdc, max consumption 1W
Power connector: co-axial, diameter 5.5 x 2.1mm
Dimensions: 136 x 191 x 45mm (W x H x D), Shank length 53mm
Weight: approx. 340g
Warranty: 3 years
These products can interest you



