Delivery in 3 to 5 weeks
Temperature and humidity sensor - Modbus RS485
Temperature and relative humidity sensor - The STH 102 is designed to measure temperature and relative humidity...
External temperature and humidity sensor - 4..20mA
Reference GPTSV130R
Delivery in 3 to 5 weeks
Product features External temperature and humidity sensor - 4..20mA
The temperature and humidity measurement sensors are located in an external probe connected to the wired electronic head. The probe is placed in the measured area and cannot be disconnected from the electronic head. The sensor head is designed for wall mounting.
The output signals of the measured quantities are two galvanically isolated 4 to 20 mA current signals, set by the manufacturer as follows:
- output quantity 1 : relative humidity, range from 4 to 20 mA corresponds to 0 to 100% RH
- output value 2 : temperature, range from 4 to 20 mA corresponds to -30 ° C to 105 ° C
| Sensor type | PTSV 130 |
| Sensor type | Point 1000/3850 |
| Output signal | two signals galvanically isolated from 4 to 20 mA |
| Output signals in case of error | <3,8 mA or> 24 mA |
| Supply voltage (Unap) | 9 to 30 V DC, maximum ripple 0,5% |
| Length of connection cables | 2 m and 4 m |
| Temperature measurement range * | -30 to 105 ° C |
| Precision | ± 0,4 ° C between 0 and 100 ° C, otherwise 0,4% of the measured value |
| Relative humidity measurement range ** | 0 to 100% RH (temperature compensated over the entire temperature range) |
| Precision | ± 2,5% RH in the range of 5 to 95% RH at 23 ° C |
| Degree of protection | electronic IP 65 according to EN 60 529; the sensors are located behind the cover with protection class IP 40 according to EN 60 529 |
| Dust filter | 0,025 mm filtration capacity |
| Operating temperature range | -30 to 80 ° C |
| Operating humidity range | 0 to 100% RH |
| Electromagnetic compatibility | conforms to standard EN 61326-1 |
| Storage conditions | temperature -30 to 80 ° C, relative humidity 0 to 100% RH non-condensing |
| The weight | about 200 and 300 g |
| Head material |
POLYAMIDE |
These products can interest you
Delivery in 3 to 5 weeks
Temperature and humidity probe - CAN
Temperature and relative humidity sensor - The STH 104 is designed to measure temperature and relative humidity...
Delivery in 3 to 5 weeks
Temperature and Humidity Probe - 4..20mA
The PTSV 110 temperature and relative humidity sensors allow you to measure temperature and humidity in ...