Web Sensor - Hygrometer and thermometer with Ethernet interface

TECHNICAL DATA

T-line web sensor for ambient temperature and relative humidity.

Remote alarm.

Web sensor with built-in relative humidity and temperature sensors.

The high precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. The dual liquid crystal display is an advantage.

The measured values ​​are also converted into another interpretation of humidity: dew point temperature, absolute humidity, specific humidity, mixing rate and specific enthalpy.

INCLUDED IN DELIVERY

• T3510
• Manual
• Traceable calibration certificate
• Free Tsensor configuration software
• Cloud for 3 months

Power supply is not included.

MEASURED VALUES

- Temperature
- Relative humidity
- Calculated values ​​(dew point, etc.)

Relative humidity range: 0 to 100%

Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C

Accuracy of temperature output: ± 0.6 ° C

Resolution: 0.1 ° C, 0.1% RH

Measuring interval: 2s

Available temperature units: degrees Celsius, degrees Fahrenheit

Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy

Dew point output accuracy and range - for details see graphics in manual: ± 1,5 ° C at ambient temperature below 25 ° C and relative humidity> 30%
range -60 to + 80 ° C

Temperature compensation of humidity sensor: the entire temperature range

Temperature operating range: -30 to + 80 ° C

IP protection: Electronics IP30

LAN connection: RJ-45, 10Base-T or 100Base-TX connector

Protocols of: WWW communication, ModbusTCP, SNMPv1, SOAP, XML

Alarm protocols: E-mail, SNMP Trap, Syslog

Configuration: T-Sensor, WWW configuration

Supply : 9 to 30Vdc, maximum consumption 1W

Power cable : coaxial, diameter 5,5 x 2,1 mm

dimensions: 88,5 x 147,5 x 39,5 mm (W x H x D), rod length 75 mm

Approx Weight: 155g

Warranty: 3 years