Temperature and Humidity Probe - 4..20mA
The PTSV 110 temperature and relative humidity sensors measure temperature and humidity in ...
Web sensor - Remote hygrometer and thermometer with Ethernet interface - POE
Reference AR003832
Product features Web sensor - Remote hygrometer and thermometer with Ethernet interface - POE
TECHNICAL DATA
T-line web sensor at room temperature and relative humidity with Power over Ethernet functionality.
Alarm remote.
PoE Web Sensor with integrated sensors relative humidity and temperature.
Le high precision capacitive polymer sensor provides excellent long-term calibration stability and ultimate accuracy.
Le dual liquid crystal display is an advantage.
Functionality power over Ethernet IEEE 802.3af compliant is supported.
The measured values are also converted to another interpretation of humidity: dew point temperature, absolute humidity, specific humidity, mixing rate and specific enthalpy.
INCLUDED IN DELIVERY
- T3610
- Manual
- Traceable calibration certificate
- Free Tsensor configuration software
- COMET Cloud for 3 months
MEASURED VALUES
- Temperature
- Relative humidity
- Calculated values (dew point, etc.)
Relative humidity range of: 0 to 100%
Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C
Accuracy of temperature output: ± 0,6 ° C
Resolution: 0.1 ° C, 0.1% RH
Measuring interval: 2s
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Dew point temperature output accuracy and range - for details see graphics in manual: ± 1,5 ° C at ambient temperature below 25 ° C and RH> 30%
range -60 to + 80 ° C
Temperature compensation of the humidity sensor on: all temperature ranges
Operating temperature range: -20 to + 60 ° C
IP protection: electronic IP30
LAN connection: RJ-45, 10Base-T or 100Base-TX connector
Communication protocols: WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols: Email, SNMP Trap, Syslog
Configuration: T-Sensor, WWW configuration
Supply : power supply via Ethernet according to IEEE 802.3af or 5Vdc
Power connector: coaxial, diameter 5,5 x 2,1 mm
Dimensions: 136 x 201 x 45 mm (W x H x D), rod length 75 mm
Weight: about 360g
Warranty: 3 years
These products can interest you
External temperature and humidity sensor - 4..20mA
The PTSV 130 temperature and relative humidity sensors are used to measure temperature and humidity in the ...
Humidity and temperature transmitter with 4-20mA outputs
Low cost transmitter. Temperature and humidity. Outdoor and indoor. Built-in sensors.
Temperature and humidity sensor - Modbus RS485
Temperature and Relative Humidity Sensor - The STH 102 is designed to measure temperature and relative humidity ...