T-line web sensor with temperature, relative humidity and atmospheric pressure.
PoE Web Sensor with relative humidity and temperature probe on the cable.
Atmospheric pressure sensor integrated.
Le high precision capacitive polymer sensor provides excellent long-term calibration stability and ultimate accuracy.
Le dual liquid crystal display is an advantage.
La power over Ethernet functionality (Power over Ethernet) conforming to IEEE 802.3af is supported.
The measured values are also converted to another interpretation of humidity: dew point temperature, absolute humidity, specific humidity, mixing rate and specific enthalpy.
The device is supplied with a T + RH probe with a 1 meter cable.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Cloud for 3 months
- Relative humidity
- Calculated values (dew point, etc.)
- Atmospheric pressure
Relative humidity range: 0 to 100%
Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C
Accuracy of temperature output: ± 0.4 ° C
Maximum atmospheric pressure measurement range: 600 to1100hPa
Atmospheric pressure accuracy: ± 1.3hPa at 23 ° C
Available atmospheric pressure units: hPa, kPa, mBar, mmHg, inHg, inH2O, PSI, oz / in2
Resolution: 0.1 ° C, 0.1% RH, 0.1hPa
Measuring interval: 2s
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Dew point output accuracy and range - for details see graphics in manual: ± 1,5 ° C at ambient temperature below 25 ° C and relative humidity> 30%
range -60 to + 80 ° C
Temperature compensation of humidity sensor: the entire temperature range
Temperature operating range: -20 to +60 ° C
IP protection: Electronics IP30, sensors IP40
LAN connection: RJ-45, 10Base-T or 100Base-TX connector
Communication protocols: WWW, Modbus TCP, SNMPv1, SOAP, XML
Alarm protocols: E-mail, SNMP Trap, Syslog
Configuration: T-Sensor, WWW configuration
Filtering capacity of the sensor cover: 0.025mm - filter with stainless steel mesh
Supply : Power over Ethernet according to IEEE 802.3af or 5Vdc
Power cable : coaxial, diameter 5,5 x 2,1 mm
Probe cable length: 1m, 2m or 4m optional
Dimensions: 136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm
Weight: about 380g
Warranty: 3 years