Call us : +33 2 33 61 16 70

DIGIL / M digital temperature / humidity probe, MiniDin connector

Reference AR006371

  • Digital probe.
  • MiniDIN connector.
  • Mesh filter.
  • Interchangeable probe.
410.37KB Download

Introduction Manual | DIGIL / M digital temperature / humidity probe, MiniDin connector

Product features DIGIL / M digital temperature / humidity probe, MiniDin connector

TECHNICAL DATA

Digital probe with MiniDIN connector.

Stainless steel mesh filter.

The probe is supplied with a calibration certificate.

The probe is interchangeable without calibration on a specific device and regardless of the length of the cable.

Optionally also available with cable of different lengths.

For other cable lengths, use the selector. 

MEASURED VALUES

- Temperature
- Relative humidity

Temperature measuring range: -30 to +105 ° C

Temperature measurement accuracy: ± 0.4 ° C

Temperature humidity measurement range (non-condensing): 0 to 100 ° RH

Relative humidity measurement accuracy: ± 2.5% RH

IP protection: The probe is covered with a stainless steel mesh filter with IP40 protection. Filtering capacity 0,025 mm. 

These products can interest you