ACCESSORIES
- heat conductive paste up to 200 ° C, 5g
- connectors
DECLARATION, CERTIFICATION, CALIBRATION
- The manufacturer provides a declaration de compliance UE.
- Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of standards and work measurement instruments is ensured within the meaning of article 5 of Law No. 505/1990 on metrology.
- We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.
| Sensor type | G03.13 |
| Measuring range |
-50 to 200 ° C (may be limited by the sensitive element, determine in the documentation) |
| Sensitive element type | Pt, Ni, NTC |
| Protection index | IP 65 according to EN 60529 |
| Housing | brass |
| Dimensions box | Ø 19 15 mm, height 6 mm |
| Input cable | shielded silicone 2 x 0,22 mm 2 shielded silicone 4 x 0,15 mm 2 |
| Wire resistance |
0,16 Ω for 1 m cable for 2-wire connection |
| Response time |
τ 0,5 <7 s (on a flat surface of the Al prism without paste) |
Tension maximum allowable from cable |
2 kg |
| Recommendation | use thermal conductive paste for installation |
