The manufacturer provides a EU declaration of conformity.
Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.
all types (Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226 = T1, NTC, PTC, KTY, TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Housing length L - measuring part
15 to 200 mm
Case diameter - measuring part
according to the dimensional draft
DIN 1.4301 stainless steel
Wire / OK
M8 x 1 / OK 12
Input cable variations / temperature range (may be limited by the type of sensitive element - to be determined in the documentation)
Shielded PVC -30 to 80 ° C Unshielded PVC -40 to 105 ° C shielded with silicone -50 to 200 ° C Teflon shielded -50 to 250 ° C with fiberglass 0 to 400 ° C (with metallic braid)
IP 50 to IP 67 according to EN 60529 - depending on the type of cable
> 200 MΩ at 500 VDC, 25 ± 3 ° C
Maximum permissible static traction on the input cable