ACCESSORIES
DECLARATION, CERTIFICATION, CALIBRATION
- The manufacturer provides a EU declaration of conformity.
- Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.
The construction of the sensor allows a fixed connection to the measured surface using a screw inserted in the hole in the sensor housing.
| Sensor type |
G03.02 |
G03.02A |
| Sensitive element type |
Pt, Ni, NTC |
| Dimension box |
outside ⌀ 14 mm
inside ⌀ 5,2 mm
|
outside ⌀ 16 mm
inside ⌀ 5,2 mm |
| Housing |
DIN 1.4301 stainless steel |
Power cable variations / temperature range
(may be limited by the type of sensitive element
- specified in the manual) |
Shielded PVC -30 to 80 ° C
Unshielded PVC -40 to 105 ° C
Shielded silicone -50 to 200 ° C
Armored Teflon -50 to 250 ° C
With fiberglass 0 to 400 ° C (with metallic braid) |
| Protection sign |
from IP 50 to IP 67 according to EN 60529
- depending on the type of cable |
| Insulation resistance (between housing and sensor) |
> 200 MΩ at 500 VDC, 25 ± 3 ° C |
| Maximum permissible static traction on the power cable |
1 kg |
