Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Angled bayonet probe, 5,7mm, -50 to 350 ° C

Reference G05.04

Delivery in 3 to 5 weeks

All of this resistance temperature sensors right angle with a TG 35 bayonet are designed to measure the temperature of solid substances, but they can also be used to measure the temperature of liquid and gaseous substances.

Due to the design of the temperature sensor, the cable is extended at a right angle to part of the sensor measurement.

560.08KB Download

Datasheet G05.04 | Angled bayonet probe, 5,7mm, -50 to 350°C

Product features Angled bayonet probe, 5,7mm, -50 to 350 ° C

Description and application

All of this resistance temperature sensors at right angles with a bayonet G05.04 are designed to measure the temperature of solid substances, but they can also be used to measure the temperature of liquid and gaseous substances. Due to the design of the temperature sensor, the cable exits at a right angle to part of the sensor measurement.

To fix the temperature sensor to a point to be measured, the bayonet head screwed onto a spring is used. La combination of bayonet nut, spring and bayonet cap corresponding can provide higher pressure from the temperature sensor at right angles to the bayonet in the measured point or can adjust any change in the distance between the nut and the measured point during the measurement.

The maximum operating temperature range of the right angle temperature sensor is between -50 and 350°C (400°C for a short time)The range of each variant is reduced with one type of temperature sensing element and the power cable. Right-angle temperature sensors comply with standards IP50 to IP67 according to standard EN 60529,

Bayonet probe, 5,7mm, right angle, -50 to 300 ° C

Sensor type G05.04
Sensitive element all types 
(Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226 = T1, NTC, PTC, KTY, 
TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)
Housing DIN 1.4301 stainless steel
Case diameter 6 mm
End of the case straight, hemisphere R6 or vertex 120 °
Case length L
60 to 200 mm
Material of the rectangular part stainless steel
Input cable variations / temperature range 
(may be limited by the type of sensitive element 
- to be determined in the documentation)
Shielded PVC -30 to 80 ° C 
Unshielded PVC -40 to 105 ° C 
silicone -50 to 200 ° C 
armored teflon -50 to 250 ° C 
with fiberglass 0 to 400 ° C (with metallic braid)
Protection sign IP 50 to IP 67 according to EN 60529 - depending on the type of cable
Material / Size of bayonet head nickel-plated brass / L = 16 mm, internal diameter 12,8 mm
Spring material / dimension DIN 1.4301 stainless steel 
/ L = 200 mm, outside Ø 8 mm, wire Ø 1 mm
Insulation resistance (between housing and sensor) > 200 MΩ at 500 VDC, 25 ± 3 ° C
Maximum permissible static traction on the input cable 1 kg.

These products can interest you