Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Magnetic temperature probe with plastic connection head

Reference G03.16

Delivery in 3 to 5 weeks
  • Magnetic temperature sensors.
  • Measures the contact temperature of ferromagnetic materials.
  • Contact with the surface ensured by a spring of the measuring surface.
  • Plastic connection head.
1.04MB Download

Datasheet G03.16 | Magnetic temperature sensor with plastic connection head

Product features Magnetic temperature probe with plastic connection head

Temperature sensor with plastic connection head

Description and application

Magnetic temperature sensors are designed to measure the contact temperature of ferromagnetic materials. The contact with the measuring surface is ensured by a spring of the measuring surface.

The plastic connection head is equipped with a cable outlet (the terminal block is placed in the connection head) or a connector. The standard operating temperature range is between -30 and 100 ° C.

Sensors can be used for any compatible control system with the sensing element output signals or the output signals shown in the sensing element type table.

ACCESSORIES For the version with connector:

  • CONEC 43-00092 input connector
  • Connection cable with straight type RKT connector or with rectangular type RKWT connector

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides an EU declaration of conformity.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.  

Cable sensors with magnetic fixing are a possible alternative to the S 190 sensor range.

Sensitive element type Nor 1000/5000 Nor 1000/6180 Ni 891 Nor 10000/5000 Nor 10000/6180
Measuring range -30 to 100 ° C
Maximum continuous current 1 mA 1 mA 1 mA 0,3 mA 0,3 mA

Sensitive element type T1 = Ni 2226 Point 100/3850 Point 500/3850 Point 1000/3850 20 kΩ NTC thermistor
Measuring range -30 to 100 ° C
Maximum continuous current 0,7 mA 3 mA 1,5 mA 1 mA 1 mW *)

*) maximum power consumption

Sensitive element type Point 1000/3850 Point 1000/3850
Output signal 4 to 20 mA 0 to 10 V
Measuring ranges -30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 
0 to 150 ° C
-30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 
0 to 150 ° C
ambient temperature around the connection head -30 to 70 ° C
Power supply (U) 11,5 to 30 V DC 15 to 30 V DC recommended value 24 V DC
Load resistance 150 Ω for 12 VDC power supply 
700 Ω for 24 VDC power supply
> 10 kΩ
Output signal 
breaking the sensitive element
> 24 mA > 10,5 V
Output signal 
- short circuit of the detection element
<3.5 mA ~0V

**) Depending on customer requirements, it is possible to provide a custom measurement range from -40 to 150 ° C; the minimum range of the range must be 35 ° C (for example, -20 to 15 ° C; -30 to 80 ° C)

OTHER PARAMETERS
Precision class Elements sensitive to Ni: class B, Δt = ± (0,4 + 0,007t), for t ≥ 0; Δt = ± (0,4 + 0,028 | t |), for t ≤ 0 in ° C; 
Elements sensitive to pt: class B according to EN 60751, Δt = ± (0,3 + 0,005 | t |) in ° C 
NTC 20 kΩ: ± 1 ° C for the range from 0 to 70 ° C
Measurement error NS 590 (K) and NS 790 (K) <0,6% of the measuring range, minimum 0.5 ° C
Sensor connection according to the wiring diagram
Diameter of the measuring surface 19 mm
Measuring area 5 N
Adhesive power of the sensor 60 N
Recommended wire section - 
sensors with washer
0,35 to 1,5 mm 2
Connector type in 
sensors head with connector
RSFM4 - Lumberg
Isolation resistance > 200 MΩ at 500 V DC, 25 ° ± 3 ° C; humidity <85%
Ingress protection IP 52 according to EN 60529
Material of the head LEXAN 500R
operating conditions ambient temperature: 
-30 to 100 ° C; -30 to 70 ° C with converter 
relative humidity: max. 100% (at room temperature 25 ° C) 
atmospheric pressure: 70 to 107 kPa
Weight about 0,1 kg (NS 590, NS 790); 0,08 kg (passive)

These products can interest you