Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Contact probe brass screw M4 -50 ... + 200 ° C

Reference G03.13

Delivery in 3 to 5 weeks
  • Resistance sensors.
  • Measures the surface temperature of solid substances.
  • Allows rapid reaction to temperature changes.
  • Surface mounted using one or two M4 screws. 
463.11KB Download

Datasheet G03.13 | Brass contact probe M4 screw -50...+200°C

Product features Contact probe brass screw M4 -50 ... + 200 ° C

ACCESSORIES

  • heat conductive paste up to 200 ° C, 5g
  • connectors

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides a declaration de compliance UE.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of standards and work measurement instruments is ensured within the meaning of article 5 of Law No. 505/1990 on metrology. 
  • We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory. 
Sensor type G03.13
Measuring range
-50 to 200 ° C (may be limited by the sensitive element, determine in the documentation)
Sensitive element type Pt, Ni, NTC
Protection index IP 65 according to EN 60529
Housing brass
Dimensions box Ø 19 15 mm, height 6 mm
Input cable shielded silicone 2 x 0,22 mm 2
shielded silicone 4 x 0,15 mm 2
Wire resistance
0,16 Ω for 1 m cable for 2-wire connection
Response time
τ 0,5 <7 s (on a flat surface of the Al prism without paste)

Tension maximum allowable from cable
2 kg.
Recommendation use thermal conductive paste for installation

These products can interest you