Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Contact probe with stainless steel or dural lug -50 ... + 200 ° C

Reference G03.11

Delivery in 3 to 5 weeks
  • Resistance sensors.
  • Measures flat and smooth solids.
  • For chemically non-aggressive environments.
  • Thermal conductive paste.
470.83KB Download

Datasheet G03.11 | Contact probe with stainless steel or dural lug -50...+200°C

Product features Contact probe with stainless steel or dural lug -50 ... + 200 ° C

ACCESSORIES

  • heat conductive paste up to 200 ° C, 5g
  • connectors  

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides a EU declaration of conformity.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory. 

    When mounting with a screw M4, it is recommended to apply a silicone or thermally conductive grease to the measured surface, which guarantees a faster response and minimizes errors in the measurement method.

Sensor type G03.11A
G03.11E
Measuring range
-50 to 200 ° C (may be limited by the sensitive element, determine in the documentation)
Sensitive element type Pt, Ni, NTC
Protection sign IP 65 according to EN 60 529
Housing DIN 1.4301 stainless steel aluminum alloy
Case length L 40 mm
Input cable shielded silicone 2 x 0,22 mm 2
shielded silicone 4 x 0,15 mm 2
Wire resistance
0,16 Ω for 1 m cable for 2-wire connection
Response time τ 0,5 <10 s (on a flat surface of the Al prism without paste)

Tension maximum allowable from cable
1 kg.
Recommendation use thermal conductive paste for installation

These products can interest you