
Temperature data logger with integrated sensor and GSM modem
Reference AR006092
Product features Temperature data logger with integrated sensor and GSM modem
TECHNICAL DATA
The data logger is designed for record from two external temperature probes, two inputs with two states.
If the defined limits are exceeded, SMS and JSON messages can be sent over a GPRS data connection.
He's possible to define the regular sending of messages JSON to the database, the send interval is adjustable.
The recording is carried out in a non-volatile electronic memory.
The data can be transferred to a PC via USB-C.
The device includes a traceable calibration certificate with declared metrological traceability of standards based on the requirements of EN ISO / IEC 17025.
INCLUDED IN DELIVERY
- U0843M
- Manual
- Traceable calibration certificate
- Rechargeable battery
- Power source
- USB-C cable
- FREE Analysis Software
- Cloud for 3 months
MEASURED VALUES
- Temperature
- Two state signal
Temperature measurement range: -200 to +260 ° C
Accuracy of temperature measurement: ± 0,2 ° C; ± 0,2% of the measured value in a range of +100 to +260 ° C
Reading resolution: 0.1 ° C
Temperature measurement response time t90 (no temperature 20 ° C, air flow rate of about 1 m / s): Depending on the connected probe
Voltage contact parameters: „L“ input voltage level: <0,4 V (*); „H“ input voltage level:> 2 V; Minimum applicable voltage: 0 V; Maximum applicable voltage: +30 V DC
Parameters of the voltage-free contact: Contact resistance in "activated" state: <10 k ?; Contact resistance in the "off" state:> 300 k? Contact voltage in the "off" state: approx. 3 V, minimum time required to lock the state: 1 s
Real time clock: Year, leap year, month, day, hour, minute, second
Data logging interval: Adjustable from 1s to 24h
Alarm display and refresh: Adjustable 1 s, 10 s, 1 min
Total memory capacity: 500 values in non-cyclic recording mode, 000 values in cyclic recording mode
Data logging mode: Non-cyclic - data logging stops after full memory, cyclical - after full memory, the oldest data is overwritten by the new ones
Supply : SONY Li-Ion 5200mAh battery)
Protection: IP20
Dimensions: 61x93x53, (with antenna) 120x93x53
Weight (including battery): 270 g
Warranty: 3 years