Temperature probes TR 089A and TR 089B, -30 to 200 ° C

Reference GTR089R

Delivery in 3 to 5 weeks
  • Sensor type Pt 100, TCK, TCJ, others on request
  • Recommended measurement current ≤ 3 mA for Pt 100/3850 measuring element
  • Measuring range -30 To 200 ° C
  • Link 4 fils

Product features Temperature probes TR 089A and TR 089B, -30 to 200 ° C

The TR 089A and TR 089B temperature sensors are designed according to the specific needs of temperature measurement in the preparation of rubber compounds. Temperature sensor variant A is equipped with a LEMO connector and can be supplemented with a head. The temperature sensor variant B is equipped with a ceramic terminal block located in the head.

The temperature sensors are very resistant to the abrasive action of rubber compounds and to vibrations. It is also possible to use sensors to measure the temperature of plastics and bulk materials. The housing of the temperature sensors is made of stainless steel and due to its construction a faster response time is obtained compared to sensors mounted in the well.

ACCESSORIES

Head DANW4-M2A-4x-NS-CaL for variant A

Cable connector connecting piece for variant A - LEMO FFA.1S.304.CLAC62

Connection cable with LEMO connector FFA.1S.304.CLAC62 for variant A

DECLARATION, CERTIFICATION, CALIBRATION

The manufacturer issues an EU declaration of conformity.

Calibration - The entire production undergoes an outgoing metrological control, which is carried out by comparison with standards or with working gauges. The traceability of standards and working calibers is ensured within the meaning of §5 of Law No. 505/1990 on metrology. The manufacturer offers the possibility of supplying calibrated sensors in the laboratory of SENSIT sro (according to the requirements of ČSN EN ISO / IEC 17025, as amended) or in AKL.

Sensor type TR 089A TR 089B
Sensor type Pt 100, TCK, TCJ, others on request
Recommended measurement current ≤ 3 mA for Pt 100/3850 measuring element
Measuring range -30 To 200 ° C
Link 4 fils
Housing stainless steel, hardenable steel measuring tip
Response time According to ČSN EN 60751, as amended: τ0,5 <7 s, 0,9 <15 s
Immersion depth 100 mm Continental method *: τ0,5 <22 s, τ0,9 <90 s
Minimum immersion depth 40 mm
Connector LEMO PCA.1S.304.CLLC /
Terminal blocks / YES
Heads DANW4-M2A-4x-NS-CaL as accessory Fixed sensor component NAA2-M2X-6x -NS-Cal
Isolation resistance > 200 MΩ at 500 VDC, 25 ± 3 ° C, humidity <80%
Mass 1,3 kg

These products can interest you

Delivery in 3 to 5 weeks
Temperature probes -30 to 200 ° C

Temperature probes -30 to 200 ° C

Sensor type Pt 100, TCK, TCJ, others on request Recommended measuring current ≤ 3 mA for measuring element Pt 10 ...