Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Temperature probes TR 098C, -30 to 200 ° C

Reference GTR098CR

Delivery in 3 to 5 weeks
  • Sensor type Pt 100, TCK, TCJ, others on request
  • Recommended measurement current ≤ 3 mA for Pt 100/3850 measuring element
  • Measuring range -30 To 200 ° C
  • Link 4 fils

Product features Temperature probes TR 098C, -30 to 200 ° C

The TR 098C temperature sensor is designed taking into account the specific needs of temperature measurement in the preparation of rubber compounds. This variant of the temperature sensor is equipped with a LEMO connector and can be completed with a head.

The temperature sensor is very resistant to the abrasive action of rubber mixes and to vibrations. It is also possible to use the sensor to measure the temperature of plastics and bulk materials. The temperature sensor housing is made of stainless steel and due to its construction a faster response time is achieved compared to sensors mounted in the well.

ACCESSORIES

Head DANW4-M2A-4x-NS-CaL

Connection piece cable connector - LEMO FFA.2E.304.CLAC65

Connection cable with LEMO connector FFA.2E.304.CLAC65

DECLARATION, CERTIFICATION, CALIBRATION

The manufacturer issues an EU declaration of conformity.

Calibration - The entire production undergoes an outgoing metrological control, which is carried out by comparison with standards or with working gauges. The traceability of standards and working calibers is ensured within the meaning of §5 of Law No. 505/1990 on metrology. The manufacturer offers the possibility of supplying calibrated sensors in the laboratory of SENSIT sro (according to the requirements of ČSN EN ISO / IEC 17025, as amended) or in AKL.

Sensor type TR 098C
Sensor type Pt 100, TCK, TCJ, others on request
Recommended measurement current ≤ 3 mA for Pt 100/3850 measuring element
Measuring range -30 To 200 ° C
Link 4 fils
Housing stainless steel, hardenable steel measuring tip
Response time According to ČSN EN 60751, as amended: τ0,5 <6 s, 0,9 <13 s
Immersion depth 100 mm Continental method *: τ0,5 <16 s, τ0,5 <80 s
Minimum immersion depth 40 mm
Connector LEMO PCA.2E.304.CLLC
Heads DANW4-M2A-4x-NS-CaL as accessory
Isolation resistance > 200 MΩ at 500 VDC, 25 ± 3 ° C, humidity <80%
Mass 1,9 kg.

These products can interest you

Delivery in 3 to 5 weeks
Temperature probes -30 to 200 ° C

Temperature probes -30 to 200 ° C

Sensor type Pt 100, TCK, TCJ, others on request Recommended measuring current ≤ 3 mA for measuring element Pt 10 ...