The TR 110A and TR 110B temperature sensors are designed taking into account the specific needs of temperature measurement in the preparation of rubber mixtures. Temperature sensor variant A is equipped with a LEMO connector and can be supplemented with a head. The temperature sensor variant B is equipped with a ceramic terminal block located in the head.
The temperature sensors are very resistant to the abrasive action of rubber compounds and to vibrations. It is also possible to use sensors to measure the temperature of plastics and bulk materials. The housing of the temperature sensors is made of stainless steel and due to its construction a faster response time is obtained compared to sensors mounted in the well.
Head DANW4-M2A-4x-NS-CaL for variant A
Cable connector connecting piece for variant A - LEMO FFA.1S.304.CLAC62
Connection cable with LEMO connector FFA.1S.304.CLAC62 for variant A
DECLARATION, CERTIFICATION, CALIBRATION
The manufacturer issues an EU declaration of conformity.
Calibration - The entire production undergoes an outgoing metrological control, which is carried out by comparison with standards or with working gauges. The traceability of standards and working calibers is ensured within the meaning of §5 of Law No. 505/1990 on metrology. The manufacturer offers the possibility of supplying calibrated sensors in the laboratory of SENSIT sro (according to the requirements of ČSN EN ISO / IEC 17025, as amended) or in AKL.
||Pt 100, TCK, TCJ, others on request
|Recommended measurement current
||≤ 3 mA for Pt 100/3850 measuring element
||-30 To 200 ° C
||stainless steel, hardenable steel measuring tip
||According to ČSN EN 60751, as amended:: 0,5 <5 s τ0,9 <10 s
|Immersion depth 100 mm
||Continental method *:: 0,5 <20 s τ0,9 <70 s
|Minimum immersion depth
||DANW4-M2A-4x-NS-CaL as accessory
||Fixed sensor component NAA2-M2X-6x -NS-Cal
||> 200 MΩ at 500 VDC, 25 ± 3 ° C, humidity <80%