Call us : +33 2 33 61 16 70

Support for 3,6 V lithium battery

Reference AR006563

  • Used as an accessory.
  • Power the transducer with batteries.
  • Equipped with a connection adapter.
  • Battery holder supplied separately, without batteries. 
1.06MB Download

Instruction Manual | Holder for 3,6 V lithium battery

Product features Support for 3,6 V lithium battery

TECHNICAL DATA

The SP015 battery holder is designed to be used as an accessory for battery-powered transducers with radio output to the Sigfox network (from the Wx8xx series).

He you allows the transducer to be powered from one or two batteries 3,6 V "C" size lithium, extending operating time up to six times over the standard life of the internal "AA" size battery.

He's equipped with a connection adapter which is mounted in place of the internal transducer battery.

The SP015 battery holder suitable for applications where the internal battery life of the transducer is insufficient and the mains power supply (with optional accessories) cannot be used.

The SP015 battery holder is supplied separately, without batteries.

It is designed for primary lithium batteries 3,6 V, size "C".

We recommend you to use Tadiran SL2770 / S batteries.

One or two batteries can be installed. 

GENERAL TECHNICAL DATA

Recommended batteries: Tadiran SL2770 / S, lithium, 3,6 V, size "C"

Output voltage: 3,6 V DC

Continuous output current: max. 200mA

Output short-circuit protection: NO (the recommended batteries are not dangerous in the event of a short circuit)

Power output adapter: connection for Wx8xx transducers

Working position: vertically, cable gland

Protection: IP65 (after mounting the connection adapter on the Wx8xx sensor)

Operating temperature : -30 to +60 ° C

Weight (without batteries): 200g (connection adapter included)

Dimensions: 120 x 93 x 43 mm 

These products can interest you

Probe support

Probe support

Support designed for temperature sensors for outdoor or indoor use for probes with ...