The Precision Plus PT100 thermometer offers high accuracy with the assurance of a 5-point UKAS certificate.
The Precision Plus measures the temperature over a range of -199,99 to 199,99 ° C with a resolution of 0,01 ° C and a high accuracy of ± 0,05 ° C. Please note: - the details indicated relate only to instruments .
The on / off, max / min and display hold buttons are ideally located on the front of the instrument. The Binder probe socket is positioned at the top of the instrument, allowing a variety of probes to be used depending on the application.
The Precision Plus thermometer has a large, easy-to-read LCD display with an open “Err” circuit and low battery indication. Each thermometer is powered by three 1,5-volt AAA batteries that provide at least 2000 hours of battery life. The unit will turn off automatically after ten minutes, thus maximizing the life of the battery. This function can be disabled by the user, if necessary.
The Precision Plus is supplied with a 160-222 PT100 1 / 10th DIN liquid probe and a UKAS 5-point calibration certificate.
To regularly check the accuracy of each precision thermometer, a range of full calibration test caps with a UKAS calibration certificate is available.
Protective silicone shell - precision thermometers are IP63 waterproof when used with this 832-050 protective boot wall mount (screws not supplied) and silicone protective boot.
range: -199,99 to 199,99 ° C
resolution: 0,01 ° C
precision: ± 0,05 ° C
drums: 3 x 1,5 volts AAA
battery life: 2000 hours
sensor type: PT100
display: 10 mm LCD
dimensions: 25 x 56 x 128 mm
weight: 130 grams
housing: ABS plastic with Biomaster antibacterial additive
Guarantee: two years
measuring scale: Celsius / Fahrenheit
certification: UKAS calibration certificate
to comply with the standard: EN 13485