The Thermapen Classic Surface industrial thermometer has all the advantages of SuperFast Thermapen 3 coupled to a ribbon surface probe and is particularly useful for determining the temperature of heating plates or pipe temperatures, etc.
This Thermapen Classic industrial thermometer incorporates a large digital screen with an accurate reading on the range -49,9 to 299,9 ° C with a resolution of 0,1 ° C and an accuracy of ± 0,4 ° C.
The resolution can be switched to 1 ° C, if required, via a switch in the battery compartment.
The thermometer will automatically turn off after ten minutes, thus maximizing battery life, this feature can be disabled if not required.
Low battery (icon) and open circuit indication are also displayed, if applicable.
Each Thermapen is powered by two lithium button cells with a minimum lifespan of 1 hours.
The thermometer probe conveniently folds 180 ° to the side of the instrument when not in use.
The housing is washable and includes the Biomaster additive which reduces bacteria growth and the ergonomic rubber seal minimizes the risk of water, dust or food ingress.
Please note that with the Thermapen tape surface probe, accuracy and speed of response will depend on the flat surface and the use of a heat transfer compound.
range: -49,9 to 299,9 ° C
Resolution: 0,1 ° C or 1 ° C - user selectable
Accuracy: ± 0,4 ° C (-49,9 to 199,9 ° C) ± 1 ° C (200 to 300 ° C)
Drums : 2 x 3 volt CR2032 lithium button cell
Battery life: 1500 hours
Type of sensor: thermocouple K
Display: 14,5 mm LCD
Dimensions: 19 x 47 x 153 mm
Weight: 97 grams
Case: ABS plastic with Biomaster antibacterial additive
Warranty: two years
Measuring scale : Celsius / Fahrenheit
Certification: FREE traceable calibration certificate
To comply with the standard : EN 13485